Products
The Commercial Products division of Branson Ultrasonics announces a new industrial ultrasonic cleaning unit to handle difficult industrial cleaning applications all in a self-contained unit. Available in 10- or 22-gallon capacity, has digital display to set temperature and time. Temperature and time can be set from 1-99 min.; temperature up 60°C. Comes with basket and cover.
Compact units incorporate 3/16, 15 gauge stainless steel construction, and a modern, solid-state ultrasonic generator available in 25 or 40KHz. industrial transducers.
Branson Ultrasonics Corp., bransonic.com
Compact units incorporate 3/16, 15 gauge stainless steel construction, and a modern, solid-state ultrasonic generator available in 25 or 40KHz. industrial transducers.
Branson Ultrasonics Corp., bransonic.com
Cobar Solder Products’ has sold over 200 units of its COBOX retrofittable spray fluxer.
Lance Larrabee, general manager, announced in a press release that “the COBOX 'Plug'n Spray' spray fluxer is a simple, drop-in replacement for foam, wave and first-generation spray-fluxers. It works with virtually any type of no-clean, alcohol or water-based, or VOC-free flux. Because it is so flexible, easy to clean and simple to install and operate, it has become especially popular, with over two hundred units sold since its introduction.”
The fluxer is easy to disassemble and service, manufactured of stainless steel and titanium parts and features a magnetically-driven nozzle assembly. Its simple design, computer-controlled movement and short distance of 50 mm (2”) to the board surface, ensures uniform wetting and through-hole penetration/top side wicking without excess deposition or flux waste. Reportedly saves more than 60% of flux over comparable foam-type fluxers.
Designed to work with the typical range for surface tension and capillary viscosity of water-based (VOC-free) fluxes, and eliminates over and under spraying problems. Features an air-driven, high precision nozzle with an adjustable cone. Is a field-retrofittable system, compatible with many soldering systems, and includes a fluxing unit, control cabinet and exhaust hood.
Lance Larrabee, general manager, announced in a press release that “the COBOX 'Plug'n Spray' spray fluxer is a simple, drop-in replacement for foam, wave and first-generation spray-fluxers. It works with virtually any type of no-clean, alcohol or water-based, or VOC-free flux. Because it is so flexible, easy to clean and simple to install and operate, it has become especially popular, with over two hundred units sold since its introduction.”
The fluxer is easy to disassemble and service, manufactured of stainless steel and titanium parts and features a magnetically-driven nozzle assembly. Its simple design, computer-controlled movement and short distance of 50 mm (2”) to the board surface, ensures uniform wetting and through-hole penetration/top side wicking without excess deposition or flux waste. Reportedly saves more than 60% of flux over comparable foam-type fluxers.
Designed to work with the typical range for surface tension and capillary viscosity of water-based (VOC-free) fluxes, and eliminates over and under spraying problems. Features an air-driven, high precision nozzle with an adjustable cone. Is a field-retrofittable system, compatible with many soldering systems, and includes a fluxing unit, control cabinet and exhaust hood.
Cobar BV, cobar.com
QTEK Stencil Clean removes solder paste, Pb-free pastes and other stencil print materials. Suitable for use in both vacuum and non-vacuum under-stencil cleaning mechanisms.
Formulated specifically for the removal of stencil contaminants, and is effective on solder paste residue.
The aliphatic hydrocarbon chemistry is non-flammable and non-corrosive, safe for use with stencils, frames, boards and the printer itself. Contains no ozone-depleting substances, is RoHS and WEEE compliant.
Penetrates solder paste and lifts it from the screen, removing contaminants from small apertures without scouring the stencil surface.
Has a high evaporation rate to leave surfaces clean and dry, and is said to provide superior solvency, as well as good wetting and dispersing characteristics.
QTEK Manufacturing Ltd., qtek.com
Formulated specifically for the removal of stencil contaminants, and is effective on solder paste residue.
The aliphatic hydrocarbon chemistry is non-flammable and non-corrosive, safe for use with stencils, frames, boards and the printer itself. Contains no ozone-depleting substances, is RoHS and WEEE compliant.
Penetrates solder paste and lifts it from the screen, removing contaminants from small apertures without scouring the stencil surface.
Has a high evaporation rate to leave surfaces clean and dry, and is said to provide superior solvency, as well as good wetting and dispersing characteristics.
QTEK Manufacturing Ltd., qtek.com
Press Releases
- StenTech Strengthens Precision Parts Platform with AME Acquisition
- Count On Tools Enhances Selective Soldering Precision with Expanded Nozzle Lineup
- ViTrox Presents Advanced Inspection and Smart Manufacturing Solutions at NEPCON Asia 2025
- ASC Sunstone Circuits Adds New Options to OneQuote While Maintaining Real-Time Pricing on Core PCB Features