Products
CSM 200 Connector Seating Machine is a semiautomatic machine for the application of compliant pin connectors. A BMEP servo electric press allows for the monitoring and control of force, distance and speed during the press process.
Operators manually load a PCB and connectors onto fixtures and tooling. The CSM automatically positions the connectors on the PCB and then an X/Y table with PCB fixture locates the PCB (up to 8 x 11") under the servo press head for processing the connector. Automatically sequentially presses each connector on the PCB to the required specifications. Each press cycle is monitored and can be stopped if an error occurs. Each press cycle can be recorded to provide real-time feedback with full traceability for every connector applied.
Specializes in processing right-angle board edge connectors with non-overmolded pins. Uses “comb” tooling to ensure proper location of the pin legs to the hole pattern in the PCB ¾ allowingr faster processing, less scrap and lower applied cost.
Tyco Electronics, tycoelectronics.com
Booth 1029
Operators manually load a PCB and connectors onto fixtures and tooling. The CSM automatically positions the connectors on the PCB and then an X/Y table with PCB fixture locates the PCB (up to 8 x 11") under the servo press head for processing the connector. Automatically sequentially presses each connector on the PCB to the required specifications. Each press cycle is monitored and can be stopped if an error occurs. Each press cycle can be recorded to provide real-time feedback with full traceability for every connector applied.
Specializes in processing right-angle board edge connectors with non-overmolded pins. Uses “comb” tooling to ensure proper location of the pin legs to the hole pattern in the PCB ¾ allowingr faster processing, less scrap and lower applied cost.
Tyco Electronics, tycoelectronics.com
Booth 1029
LSM-500S Series Laser Scan Micrometers use high speed scanning to deliver a high data sampling rate.
Offers 3,200 scans per second at a repeatability of ±0.03µm (LSM-500S) to inspect rapidly moving or vibrating workpieces such as optical fiber, fine wire, micro shafts, films, ferrules and similar items.
Incorporates an edge-detection circuit, which simplifies finding and aligning on workpiece edges. Said to feature easy operation, robust construction and a wide measuring range.
Data can be output via a standard RS-232C and I/O analog interface for use in multiple statistical analyses.
Mitutoyo America Corp., www.mitutoyo.com
Chassis Carts are ideal for 19" chassis handling for box build. Offer fully adjustable rails to fit all chassis sizes. Open-top cart design accommodates vacuum lift heads to place chassis in and out of the cart. Also available: ESD Softsurface material on the top, bottom and side of the rails, and front vertical post edges of the cart. This protects the chassis from scratches and dents during handling. The cart can hold up to 1,000 lb.
Bliss Industries, blissindustries.com
Apex booth 857
Bliss Industries, blissindustries.com
Apex booth 857
Press Releases
- 4FRONT Solutions Invests in Seica’s PILOT V8 NEXT Flying Probe Tester to Enhance Test Capabilities at DeLand, FL Facility; Mike Sementelli Comments
- FRANK Elektronik invests in high-precision SMT line with ASYS machines; Robert Both Comments
- SASinno Americas Opens State-of-the-Art Facility in Washington, Missouri to Support North American Manufacturers; Mike Young Comments
- ZESTRON Hosts Webinar on “Electronic Assembly Failures, Solutions and Lessons Learned for Long Term Reliability”