Products
Elektrobit Group will highlight the Display Tester in booth E1A04 during Nepcon China/EMT China in April. It provides automated testing on in-line or stand-alone test systems, and features software for the testing of small LCD displays, keyboards and housings of electronics equipment. The tester offers display defect detection through an immunity to significant variations in illumination, party orientation and display protection tape.
Features an Easy Test Case generation with GUI and does not require programming. It integrates easily through COM interface. It also supports a range of Firewire (IEEE-1394) and USB 2.0 cameras. Run-time version with calibration features is also available.
Features include unlimited maximum resolution, support for up to 254 cameras, test cases controllable with separate customer-specific applications and image processing in a computer with no extra hardware. No third-party low-level image processing libraries are needed.
Has tools for display location and alignment as well as for pixel defect and contrast identification. It performs the measurements for pattern matching, colour and greyscale illumination and keypad backlight. Inspects the icon presence and measures the keypad distance and size. The calibration tool uses pixel grid or checkerboard pattern method. Focus analysis tool extends usage to camera module testing.
Elektrobit, elektrobit.com
Europlacer will display the Xpress 25 flexible, high-volume SMT placement system in booth 1F01 at the upcoming Nepcon China/EMT China trade show and exhibition.
Claims to bring new vision to modular placement ¾ combining high-speed and fine-pitch capabilities in a compact footprint. Twin heads can place an array of devices from 0201 to 50 x 50 mm QFP (70 x 70 mm QFP and 100 mm connector optional) at a tact time of 0.144 sec. (25,000 cph). Equipped with “smart nozzles” and on-the-fly vision.
Benefits include intelligent feeder technology, “smart” nozzles and more.
Has feeder capacity of 92 x 8 mm and an accuracy of ±0.06 mm (QFP) to ±0.1 mm (chip) at 4 sigma. Features a minimum pitch of 0.4 mm (with an 0.3 mm optional) and a tape size range of 8 to 88 mm.
Available options include: intelligent tape feeders, intelligent tape trolley, intelligent belt feeders, intelligent vibratory feeders, intelligent internal matrix tray, intelligent matrix tray sequencer, passive tape trolley, offline storage trolley, component verification, barcode reader, fixed upward vision camera and software.
Europlacer, europlacer.com
Claims to bring new vision to modular placement ¾ combining high-speed and fine-pitch capabilities in a compact footprint. Twin heads can place an array of devices from 0201 to 50 x 50 mm QFP (70 x 70 mm QFP and 100 mm connector optional) at a tact time of 0.144 sec. (25,000 cph). Equipped with “smart nozzles” and on-the-fly vision.
Benefits include intelligent feeder technology, “smart” nozzles and more.
Has feeder capacity of 92 x 8 mm and an accuracy of ±0.06 mm (QFP) to ±0.1 mm (chip) at 4 sigma. Features a minimum pitch of 0.4 mm (with an 0.3 mm optional) and a tape size range of 8 to 88 mm.
Available options include: intelligent tape feeders, intelligent tape trolley, intelligent belt feeders, intelligent vibratory feeders, intelligent internal matrix tray, intelligent matrix tray sequencer, passive tape trolley, offline storage trolley, component verification, barcode reader, fixed upward vision camera and software.
Europlacer, europlacer.com
At SMT/Hybrid/Packaging on May 30-June 1, in Nuremberg, Germany, GÖPEL will exhibit products for AOI and JTAG/Boundary Scan. Visitors can see the OptiCon AOI platform, the JTAG/Boundary Scan hardware architecture Scanflex and the latest version of the Integrated Boundary Scan Development Environment System Cascon in stand 339, hall 4.
The OptiCon system’s core element is a modularly extendable camera. This camera allows the alternative selection between a one- and four- MegaPixel camera module. For even higher test coverage, the user can install additional camera options for THT components, color inspection or 3-D measurement as well as angled view inspection. The platform is said to offer high test speed, reduced debug times, minimal false call rate and high fault coverage.
The OptiCon system’s core element is a modularly extendable camera. This camera allows the alternative selection between a one- and four- MegaPixel camera module. For even higher test coverage, the user can install additional camera options for THT components, color inspection or 3-D measurement as well as angled view inspection. The platform is said to offer high test speed, reduced debug times, minimal false call rate and high fault coverage.
GÖPEL electronic, goepel.com
Press Releases
- StenTech Strengthens Precision Parts Platform with AME Acquisition
- Count On Tools Enhances Selective Soldering Precision with Expanded Nozzle Lineup
- ViTrox Presents Advanced Inspection and Smart Manufacturing Solutions at NEPCON Asia 2025
- ASC Sunstone Circuits Adds New Options to OneQuote While Maintaining Real-Time Pricing on Core PCB Features