Products
EP62-1MED is a two-component epoxy adhesive system featuring chemical and temperature resistance. Designed to withstand repeated cycles of steam, ethylene oxide, radiation and chemical sterilization.
Cures at moderately elevated temperatures (150° to 200°F) and offers a long working life at room temperatures. Contains no solvents or volatiles and has a 100 to 10 mix ratio by weight.
Said to have bond strength to metals, glass, ceramics, wood and most plastics. Durable and serviceable up to 400°F. Shrinkage upon cure is low (<0.06%). The color of part A is clear and part B is brown. Available in pint, quart, gallon and five-gallon kits. Also available in gun applicators.
Cures at moderately elevated temperatures (150° to 200°F) and offers a long working life at room temperatures. Contains no solvents or volatiles and has a 100 to 10 mix ratio by weight.
Said to have bond strength to metals, glass, ceramics, wood and most plastics. Durable and serviceable up to 400°F. Shrinkage upon cure is low (<0.06%). The color of part A is clear and part B is brown. Available in pint, quart, gallon and five-gallon kits. Also available in gun applicators.
Master Bond Inc., masterbond.com
Series 150 Vertical Flow Modular Plenum Sections consist of full ceiling, HEPA filter plenum sections that provide filtered laminar flow air to clean areas. Designed to deliver filtered air through 100% of the ceiling’s available surface area.
Units with blowers on top are the Series 152. With legs added, these become the Series 552. The Series 552 is a building suspended filter plenum. The blower and motor are mounted directly on top of the Series152 filter plenum and blow directly into it. The Series 552 can be supplied with or without soft wall curtains and can also be supported with legs.
The Series 151 and Series 152 are designed to hang from a building, or they may be installed on a custom frame. The Series 551 and Series 552 are designed to be freestanding.
Available in a number of configurations. Units with blowers on the end are the Series 151. With legs added, these become the Series 551 – a fully functional cleanroom that consists of legs and soft wall vinyl curtains that are mounted to the Series 151 low-profile filter plenum. The low-profile plenum extends beyond the end of the cleanroom. The Series 551 can be building suspended with or without curtains.
Units with blowers on top are the Series 152. With legs added, these become the Series 552. The Series 552 is a building suspended filter plenum. The blower and motor are mounted directly on top of the Series152 filter plenum and blow directly into it. The Series 552 can be supplied with or without soft wall curtains and can also be supported with legs.
The Series 151 and Series 152 are designed to hang from a building, or they may be installed on a custom frame. The Series 551 and Series 552 are designed to be freestanding.
Clean Air Products, cleanairproducts.com
ECV-100 Coolveyor is a cooling fan conveyor used post-reflow; without proper cooling, damage can occur to Flash programming IC and other temperature-sensitive components. Pb-free soldering, in particular, requires a high-temperature process.
Can efficiently reduce the temperature of a board (PCB and components) with a well-insulated unit that uses a cooling compressor to maintain the interior temperature of 5° to 10°C with a fan. Equipped with an anti-static transparent viewing window.
Benefits include room temperature setting, the capability to accommodate PCBs from 50 x 50 to 250 x 330, air is cooled by the cooling unit, insulated case structure unit with viewing window and conveyor speed control of 1 to 2 m/min. Measures 800 x 1,000 x 1,500 and weighs 310 kg. When setting at 5° to 10°C, the temperature of the board surface drops at 2°C/sec.
Eunil H.A. Americas, eunil.com
Can efficiently reduce the temperature of a board (PCB and components) with a well-insulated unit that uses a cooling compressor to maintain the interior temperature of 5° to 10°C with a fan. Equipped with an anti-static transparent viewing window.
Benefits include room temperature setting, the capability to accommodate PCBs from 50 x 50 to 250 x 330, air is cooled by the cooling unit, insulated case structure unit with viewing window and conveyor speed control of 1 to 2 m/min. Measures 800 x 1,000 x 1,500 and weighs 310 kg. When setting at 5° to 10°C, the temperature of the board surface drops at 2°C/sec.
Eunil H.A. Americas, eunil.com
Press Releases
- Aegis Software Expands its Presence in France and Partners with STPGroup
- Altus Adds Breakthrough Automated Inline Laser Depaneling System to its Line-Up
- Fuji America Promotes Chris Dayney to Technical Marketing Manager, Expanding Focus on Premium Technical Content
- BTU International Announces Strategic Manufacturing Expansion in Singapore to Strengthen Global Supply Chain