EASYpick Trak3 components are said offer increased functionality, improved ergonomic features and advanced diagnostic tools. Hardware developments enable higher productivity and accuracy in order fulfillment operations, compared to conventional pick-to-light systems.
Snap into the track at the pick face with a cable-less connection, for easy reconfiguration. The standard 4" wide pick-to-display and 2" pick-to-light components are compact and permit dense placement and precise alignment with the pick location.
Acknowledgement buttons on the devices are designed for durability and easy response to finger pressure. Pressed buttons will make a connection if any of four touch actuators are engaged. An elastomer keypad design provides reliability and eliminates the possibility of keycaps falling off
Replace the single incandescent gumball picking direction light used in conventional picking units with six small, bright and easily readable LEDs. Depending on function, devices can display red, amber or green lights, and can be set for static illumination or intermittent flash.
Has self-diagnostic tools that can be run at the device and/or the network level, reducing the time required to isolate faulty hardware. Feature embedded device-level software that automatically checks and self-corrects common problems caused by power fluctuations or severed power connections.
The pick-to-light version uses pick lights to indicate bin location and bay displays to indicate picking quantities. Pick-to-light devices, like pick-to-display pick lights, can function in a dual mode controlling an upper and lower location. Also available for left/right location for pallet picking.
FKI Logistex North America, www.fkilogistex.com
The Micro thermal imaging system for microscopic applications consists of the Infrasight thermal imaging camera, microscopic 20 μm lens, optical mounting table, vertical focusing stage, locking xy stage with micrometers, adjustable cooling fan, Dell tower PC with LCD multimedia monitor, required cables and Thermalyze image analysis software.
Optional accessories include a thermal stage and controller, I/O module with eight relay outputs and wide-angle lens (resolution 100 μm to ∞).
The camera obtains the temperature at 19,200 individual points on each image with temperature sensitivity of 0.2˚C for the microscopic lens and 0.1˚C with wide angle lens.
The software provide real-time (30 frames/sec) viewing, automatic emissivity correction and analysis tools to obtain the temperature information needed.
Useful in R&D, design, and troubleshooting applications.
OptoTherm Inc., www.optotherm.com