Cobar 396-FTA VOC-free flux for Pb-free wave soldering applications has less than 2% solids, yielding clean post solder surfaces even on difficult solder resists. Said to deliver excellent soldering performance on most types of circuit boards. Eliminates solder balls as well as wetting and wicking issues, even on OSP assemblies.
Self-cleaning Wash Tank has no horizontal floor surfaces,
preventing solder paste from building up on the tank’s floor. Is
equipped with multiple funnels mounted on the tank floor. The end of
the funnels feeds into a small diameter metal tube. Water is pumped
through the tube at 15 ft/ sec., sweeping solder paste into a filter
housing.
Neither an operator nor a maintenance technician is
required to scrape solder paste from the bottom of a wash tank.
Prevents solder paste from entering a waste stream, eliminates direct
contact between an operator and the paste.
Available in SonicOne G3 automatic stencil cleaning systems and will be introduced on semi-automatic models throughout 2006. Aqueous Technologies Corp., aqueoustech.com
2-D vision inspection option on the 4710 detects lead defects. Is compatible with a high-speed camera, verifies all leads are within some tolerance before the chips are shipped to the customer. Detects edge pitch, which identifies skewed leads at 0.02 mm and trend edge position, which identifies lifted leads at 0.04 mm.
Used on automated programming systems, the vision system mounts onto a tape loader and integrates with BP Win and Jobmaster.
The 4710 is designed for high density devices and longer programming times, for programming Flash, as well as Microcontrollers, FPGAs, PLDs and other device types. Can program devices with densities up to 4 Gbits. Incorporates USB 2.0 standard bus for communications.