Products
Sonoscan was granted US Patent #6,895,820 covering the Virtual Rescanning Module (VRM).
The VRM technique permits engineers to acquire and save acoustic echo data from the entire volume of a part such as an integrated circuit package. The saved digital file can later be rescanned to make acoustic images as though the file were the physical IC package.
VRM is widely used to preserve data about parts before they go into production or into testing. After a part has been altered by heat, testing or other factors, it is no longer too late to examine the part in its original condition.
In advanced flip-chip production, VRM is used with the patented Sonoscan method for Frequency Domain Imaging (FDI) to perform high-resolution non-destructive analysis of critical flip-chip interfaces.
Sonoscan Inc., sonoscan.com
The VRM technique permits engineers to acquire and save acoustic echo data from the entire volume of a part such as an integrated circuit package. The saved digital file can later be rescanned to make acoustic images as though the file were the physical IC package.
VRM is widely used to preserve data about parts before they go into production or into testing. After a part has been altered by heat, testing or other factors, it is no longer too late to examine the part in its original condition.
In advanced flip-chip production, VRM is used with the patented Sonoscan method for Frequency Domain Imaging (FDI) to perform high-resolution non-destructive analysis of critical flip-chip interfaces.
Sonoscan Inc., sonoscan.com
K4000 PCB singulator depanelizes skip routed PCB panels up to 24" long. Simply place the bottom scoreline of the PCB onto the linear blade and step on a guarded foot switch to bring the circular blade across the top scoreline for clean separation of the PCB panels. Right and left blade guards assure operator safety. The front and back support and take up table are height adjustable.
Available with optional light beam safety curtain across the front of the blades for additional operator safety, and a conveyor belt to bring singulated PCBs to the side for easy removal. An infrared sensor on the end of the conveyor will stop the belt for PCBs with components on them. Scrap pieces will pass underneath the sensor beam into a discard bin.
Tooling to help the operator align panels is also available.
R100 is a high-speed, tabletop PCB router with built-in dust extraction channels. Can be used to finish singulating tab-routed PCB panels by manual operation. Two guide pins, one in back of the router bit and one in front of the router bit assure that the board will move past the router bit along the line of the routing channel, for clean, straight separation of the panel. The front guide pin can be brought in and out from the tooling bit to match the tab size on the PCB. Rotating the guide pin positioning collet will let the operator match the curvature of the cutting path to that of a round PCB panel.
Can be used as back up for high-volume routing or punch systems. In-house dust extraction vacuum can be connected to the tool, or a dust extraction vacuum is available separately.
FKN Systek, FKNSYSTEK.com
Available with optional light beam safety curtain across the front of the blades for additional operator safety, and a conveyor belt to bring singulated PCBs to the side for easy removal. An infrared sensor on the end of the conveyor will stop the belt for PCBs with components on them. Scrap pieces will pass underneath the sensor beam into a discard bin.
Tooling to help the operator align panels is also available.
R100 is a high-speed, tabletop PCB router with built-in dust extraction channels. Can be used to finish singulating tab-routed PCB panels by manual operation. Two guide pins, one in back of the router bit and one in front of the router bit assure that the board will move past the router bit along the line of the routing channel, for clean, straight separation of the panel. The front guide pin can be brought in and out from the tooling bit to match the tab size on the PCB. Rotating the guide pin positioning collet will let the operator match the curvature of the cutting path to that of a round PCB panel.
Can be used as back up for high-volume routing or punch systems. In-house dust extraction vacuum can be connected to the tool, or a dust extraction vacuum is available separately.
FKN Systek, FKNSYSTEK.com
See-Flo 202 Air-Draulic meter system is the second in the Micro-Meter 2 product line. It is a positive-displacement, two-component meter-mix dispensing system to apply precision beads and metered shots of precisely mixed resins such as epoxies, acrylics, urethanes and silicones. AirDraulic (air-over-oil) drive motor is said to provide consistent, repeatable bead profiles and adjustable metered shot volumes. Reportedly improves production rates and product quality and reduces manufacturing costs.
AirDraulic drive control provides a preset material-dispensing profile with consistent dispense results. The volume is easily and quickly changed to dispense precisely mixed materials for different part configurations. Can be used in various two-component meter, mix and dispense applications such as bonding, gasketing or potting applications for manual, automated, indexing, XYZ-motion and robotic processes. The control panel accepts commands directly from the operator or automation panel.
System includes a Snuf-Bak or No-Drip dispense valve with seals matched to each dispense fluid. The rugged dispense valve may be remote-mounted. Disposable No-Flush mixers mix and dispense epoxies, polyurethanes and silicones.
Sealant Equipment & Engineering, www.SealantEquipment.com
AirDraulic drive control provides a preset material-dispensing profile with consistent dispense results. The volume is easily and quickly changed to dispense precisely mixed materials for different part configurations. Can be used in various two-component meter, mix and dispense applications such as bonding, gasketing or potting applications for manual, automated, indexing, XYZ-motion and robotic processes. The control panel accepts commands directly from the operator or automation panel.
System includes a Snuf-Bak or No-Drip dispense valve with seals matched to each dispense fluid. The rugged dispense valve may be remote-mounted. Disposable No-Flush mixers mix and dispense epoxies, polyurethanes and silicones.
Sealant Equipment & Engineering, www.SealantEquipment.com
Press Releases
- SP Manufacturing Brings World-Class EMS Expertise to MD&M East 2025; Jackson Tan Comments
- Aligned Solutions Announces Leadership Transition: Bryce Timms to Succeed Mike Young in Ohio, Kentucky, Western PA; Jim Rittma Comments
- SASinno Americas Expands Product Portfolio with Private-Labeled Purex Fume Extraction Systems; Mike Young Comments
- DISTRON CORPORATION Celebrates 20-Year Anniversary of Test Engineering Manager Richard Guerin