Products
Fluid Dispenser Pen increases precision in fluid dispensing and eliminates the mess associated with dispensing bottles. The chisel point, spring-loaded tip allows users to determine the amount of liquid to be dispensed, thus reducing waste and chemical exposure.
While primarily used for flux dispensing, can also be used to dispense solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids. Prevents evaporation of material and conforms to current regulations for controlling substances capable of evaporation hazard. A dispensing valve prevents flooding and spattering, and releases liquid in controlled amounts to the nib.
The two parts (cap and reservoir) are easily assembled. The reservoir should be filled with material to within 19 mm (0.75”) of the top; this air chamber allows for the valve cap to be pressed securely in position. Priming is achieved by depressing the nib while the pen is vertical.
Can be used for rework and touch up soldering, as well asdistribution of solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids.
Fluid Dispenser with Brush Tip consists of a polypropylene cartridge with a fine nylon brush tip, and has a capacity of 7 cc. The fine brush tip allows users to reach small areas with increased accuracy. The transparent cartridge allows the user to view the level of remaining material, and as applying light pressure to either side of the barrel dispenses the fluid, the user has complete control over the amount of fluid being dispensed.
QTEK, qtek.com
While primarily used for flux dispensing, can also be used to dispense solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids. Prevents evaporation of material and conforms to current regulations for controlling substances capable of evaporation hazard. A dispensing valve prevents flooding and spattering, and releases liquid in controlled amounts to the nib.
The two parts (cap and reservoir) are easily assembled. The reservoir should be filled with material to within 19 mm (0.75”) of the top; this air chamber allows for the valve cap to be pressed securely in position. Priming is achieved by depressing the nib while the pen is vertical.
Can be used for rework and touch up soldering, as well asdistribution of solvents, lubricants, masking, RMA chemistries, adhesives and water-based liquids.
Fluid Dispenser with Brush Tip consists of a polypropylene cartridge with a fine nylon brush tip, and has a capacity of 7 cc. The fine brush tip allows users to reach small areas with increased accuracy. The transparent cartridge allows the user to view the level of remaining material, and as applying light pressure to either side of the barrel dispenses the fluid, the user has complete control over the amount of fluid being dispensed.
QTEK, qtek.com
Non-Silicone Heat Transfer Compound (HTC) provides efficient thermal coupling of electrical and electronic components. Provides non-creep characteristics and thermal conductivity even at high temperatures: 0.9 W/m.K. Has a broad operating temperature range (-50º to +130º) and offers low toxicity. HTC Plus (HTCP) provides even higher thermal conductivity at 2.8 W/m.K with superior heat transfer characteristics.
Silicone Heat Transfer Compound (HTSP) is a thermally conductive paste for special applications where thermal management is critical. Operates from -50º to +200º, is a metal oxide filled silicone oil providing thermal conductivity at 3.0W/m.K.
The flame retardant ER 2074 epoxy resin exhibits thermal conductivity and is free of abrasive fillers such as alumina. Ensures less wear on mix and dispense and other processing equipment. Shows low viscosity when mixed and the exotherm temperature rise on curing is low.
Aquacoat Plus eliminates the need for extraction and other precautions normally required for the application of conventional solvent-based conformal coatings. The aqueous conformal coating is non-flammable, contains low levels of VOCs and no isocyanates, so it can be soldered through without fear of highly toxic gases being produced. Is phenol-free, so is non-corrosive to cadmium and zinc plate. Based on polymeric materials, offers adhesion on a variety of substrates and a wide operating temperature range. Available in two formulations: WBP is the standard product and WBPS (Sprayable) is for use in selective film coating equipment. Is DEF-STAN, MIL and IPC-CC-830 and RoHS compliant.
Flexible Lead-Free Conformal Coating (LFCC) is transparent and fast drying. Designed to protect electronic circuitry processed with lead-free soldering products, it provides adhesion to lead-free flux and fluoresces under UV light for ease of inspection. Can be soldered through without highly toxic gases being produced and is non-corrosive to cadmium and zinc plate.
Electrolube, electrolube.com
Silicone Heat Transfer Compound (HTSP) is a thermally conductive paste for special applications where thermal management is critical. Operates from -50º to +200º, is a metal oxide filled silicone oil providing thermal conductivity at 3.0W/m.K.
The flame retardant ER 2074 epoxy resin exhibits thermal conductivity and is free of abrasive fillers such as alumina. Ensures less wear on mix and dispense and other processing equipment. Shows low viscosity when mixed and the exotherm temperature rise on curing is low.
Aquacoat Plus eliminates the need for extraction and other precautions normally required for the application of conventional solvent-based conformal coatings. The aqueous conformal coating is non-flammable, contains low levels of VOCs and no isocyanates, so it can be soldered through without fear of highly toxic gases being produced. Is phenol-free, so is non-corrosive to cadmium and zinc plate. Based on polymeric materials, offers adhesion on a variety of substrates and a wide operating temperature range. Available in two formulations: WBP is the standard product and WBPS (Sprayable) is for use in selective film coating equipment. Is DEF-STAN, MIL and IPC-CC-830 and RoHS compliant.
Flexible Lead-Free Conformal Coating (LFCC) is transparent and fast drying. Designed to protect electronic circuitry processed with lead-free soldering products, it provides adhesion to lead-free flux and fluoresces under UV light for ease of inspection. Can be soldered through without highly toxic gases being produced and is non-corrosive to cadmium and zinc plate.
Electrolube, electrolube.com
Ovation Products has released the Quik-Lok PCB clamping system for MPM UP2000 and AP25-27 series printers. The device eliminates the conventional vacuum chamber board fixture common on most MPM printers and is field retrofitted in approx. one hour.
The clamp provides secure, “over the top” PCB clamping as well as a tool-less, hands-off product changeover.
Installation of this product enables the use of Ovation’s Grid-Lok automatic support tooling.
Ovation Products, grid-lok.com
Press Releases
- SP Manufacturing Brings World-Class EMS Expertise to MD&M East 2025; Jackson Tan Comments
- Aligned Solutions Announces Leadership Transition: Bryce Timms to Succeed Mike Young in Ohio, Kentucky, Western PA; Jim Rittma Comments
- SASinno Americas Expands Product Portfolio with Private-Labeled Purex Fume Extraction Systems; Mike Young Comments
- DISTRON CORPORATION Celebrates 20-Year Anniversary of Test Engineering Manager Richard Guerin