Circuits Assembly Online Magazine - Current Issue

Products

The Hot Beam 03 rapid IR underheater is a self-contained unit said to boost PCB preheat temperatures at the rate of 3.5ºC/sec. Set temperatures are maintained during soldering. With up to 50% of thermal energy from below, temperature of solder tips is reportedly lowered by approximately 50ºC. Is said to make traditional hand soldering risk-free. When shut down, it instantly returns to touchable ambient temperature. Is thermocouple profilable and stores 11 programs. Handles board sizes to 400 x 400 mm and any thickness.

Manncorp, www.manncorp.com

Model SV1217SS spray valve and programmable controller SVC100 are said to direct a fine mist of lubricant to a moving part using time and pressure sequencing. Controlling the relationship between the lubricant start signal and the misting signal allows the lubricant line pressure to start momentarily after the misting pressure initiates, reversing the process at the end of the cycle. This sequencing is said to ensure a non-clogging system. For up to 400 cycles per minute. Viscosity can be accommodated up to 1000 cps.

I&J Fisnar Inc., www.ijfisnar.com

Cadstar 10 is the desktop solution that is said to include more functionalities for schematic, library and PCB design, tighter integration with FPGA design tools, and an alternative schematic front-end solution: E³.logic. Offers the ability to perform version control at the parts and component level, store parts information in the PCB design, set up layer stacks for buried and blind via technologies and carry out impedance controlled routing. Includes ODB++ output for manufacturing, the ability to highlight nets using multiple colors, FPGA design integration, and an integrated parts library manager. Operations are available while working in a mirrored view in P.R.Editor.

Zuken, www.zuken.com