Products
CA-105 conductive LED die attach adhesive is for attaching LEDs and other small semiconductor die to silver and copper lead frames. Has a high glass transition temp. to facilitate wire bonding small die; has low extractable ionics and high adhesion to silver and copper lead frames. Has a dispensing open time (pin transfer) greater than 24 hr. (measured as a 25% increase in viscosity).
Engineered Material Systems, www.emsadhesives.com
ProDesk3D full-color 3D desktop printer is intended for rapid product prototyping and desktop manufacturing. Can select colors for 3D objects, make refinements, and print. Automates printer setup, including auto-leveling the build platform.
botObjects, http://botobjects.com
UltraClean VOC-free benchtop flux remover cleans rosin fluxes, synthetic fluxes, "no-clean" fluxes, and Pb-free materials. Can remove silicone-based glues, coatings and insulators. Meets health, safety and environmental restrictions. Is halogen-free and ozone-safe. Uses a non-flammable propellant. Does not use water or alcohol. Is reportedly ideal for rework and repair. Packaged in a 300gm aerosol. Comes in 3.9L, 19L, and 200L packages.
MicroCare, www.microcare.com
95 RX Flux is low-VOC technology developed for vintage soldering machines that use foam fluxers. Can foam up to 0.5" high; reportedly will not creep out of slots and PTH. Water content provides strong foaming bubbles that carry kinetic energy; assists in cleaning surfaces and gets flux in holes that need to accept solder. Prevents solder balling, with a minimum amount of residue.
Cobar Solder Products, www.cobar.com
Balver Zinn Group, www.balverzinn.com
Juliet desktop tester now supports all embedded system access technologies for in-system programming of Flash, PLD and MCU, as well as structural and functional at-speed board test. Universal adaptors for fast prototype adaption, an automated release mechanism, and a pneumatic lock mechanism are available. Provides same user interface as Rapido inline programmers. Is equipped with an interface to an exchangeable adaptor to accommodate different UUT. All systems provide four independently programmable UUT voltages, including current measurement for two and four registers for support of gang-applications.
Goepel electronic, www.goepelusa.com
Wafer-Vac general-purpose wafer vacuum handling tool comes with 8" molded wafer tip (WV-9000-MW8). Handles wafers, solar cells and other substrates. Diaphragm vacuum pump generates up to 10" of mercury with an open air flow of 2.3 lpm. Connects to ground automatically with a three-wire power cord. Class 100 Cleanroom safe. Comes standard with long-life pump and push-button wafer tip pen: VWP-500-2.5mm. Has a footprint of 7¼" x 3" x 2½" and comes with 6' of clear coiled vacuum hose. Plugs directly into 110V 50/60 Hz.
Virtual Industries, www.virtual-ii.com
Press Releases
- E-tronix Hosts Webinar with Laser Wire Solutions CEO on Advancing Medical Manufacturing Through Laser Technology
- Niche Electronics Completes Transition to Enhanced Leadership Team
- Aegis Software Expands its Presence in France and Partners with STPGroup
- Altus Adds Breakthrough Automated Inline Laser Depaneling System to its Line-Up