Products
LR-T Series multi-purpose laser sensor features a high level of detection ability, with stable detection over long or short distances, regardless of target surface type, color, or finish. Is reportedly not affected by environmental factors like ambient light, mist, or excessive dust. OLED display screen shows all important values needed for setup, calibration and operation. Intuitive menus ease navigation through functions and settings. Large, bright indicator light, visible from any angle, specifies sensor status. Adjustable beam spot and application specific detection modes. IP65/IP67 enclosure rating.
Keyence Corp. of America, www1.keyence.com/PRLRT
Buran B100 screen printer has a print format of 75 x 75mm to 508 x 508mm. Repeatability said to be -/±15μm @ 6 Sigma. Cycle time is 12 sec. (without print)
. Handles PCB of thicknesses ranging from 1 to 6mm. Single lane conveyor. Optical positioning system consists of two high-resolution cameras: 2D inspection system for post-print and stencil bottom-side control. Automatic programmable stencil cleaning system.
Dial-Electrolux, www.DialElectrolux.ru
Buran B100 screen printer has a print format of 75 x 75mm to 508 x 508mm. Repeatability said to be -/±15μm @ 6 Sigma. Cycle time is 12 sec. (without print). Handles PCB of thicknesses ranging from 1 to 6mm. Single lane conveyor. Optical positioning system consists of two high-resolution cameras: 2D inspection system for post-print and stencil bottom-side control. Automatic programmable stencil cleaning system.
Dial-Electrolux, www.DialElectrolux.ru
MX80 pick-and-place system assembles SMT components from 0201 to 35 x 35mm with a full vision, touchless component centering. Pattern recognition system is easy to use. Built-in intelligent vision system enables picking of bulk (loose) components from container-type feeders or trays. Placement area 325 x 500mm. Has 80 feeder slots for 8 mm tapes + 30 sticks of SO8 - Placement rate 4000 cph. 
Placement accuracy said to be better than 0.08mm, and X/Y resolution is 5 microns. Linear encoders standard. Automatic fiducial correction and bad mark sensing.
Mechatronika, www.Mechatronika.com.pl
MX80 pick-and-place system assembles SMT components from 0201 to 35 x 35mm with a full vision, touchless component centering. Pattern recognition system is easy to use. Built-in intelligent vision system enables picking of bulk (loose) components from container-type feeders or trays. Placement area 325 x 500mm. Has 80 feeder slots for 8 mm tapes + 30 sticks of SO8 - Placement rate 4000 cph. Placement accuracy said to be better than 0.08mm, and X/Y resolution is 5 microns. Linear encoders standard. Automatic fiducial correction and bad mark sensing.
Mechatronika, www.Mechatronika.com.pl
M70 fully automatic SMT placement machine assembly offers flexible Feeding options for bulk components. Optical component centering. Optional fully automatic precision dispenser for solder paste and SMD adhesives. For small to medium volume production. Accepts circuit boards up to 350 x 500mm. Places parts ranging from 0201 to 35 x 35mm and 0.5mm pitch. Has 80 sampling positions for 8mm straps. Placement rate 1,500-1,800 cph. X/Y resolution is 10 microns, and placement accuracy is better than 0.1mm.
Mechatronika, www.mechatronika.com.pl
Press Releases
- Libra Industries Expands Precision Fabrication Capabilities in Guaymas with Advanced Amada Laser System
- Distron Adds Second Juki Selective Soldering System to Support Growing Production Demand
- Amtech’s New Process Upgrades Elevate Transparency, Speed, and Manufacturing Readiness
- FlashPCB Enhances SMT Production Line with Heller 1809 Reflow Oven and KIC ProBot