Products
Mycronic's Iris 3D AOI features a new generation of laser scanners, image sensors and computing systems to improve test coverage while capturing nearly twice as many pixels at speeds up to 30% faster than previous technologies.
Master Bond EP5TC-80 is a one part, NASA low outgassing rated epoxy that achieves a thermal conductivity of 3.3-3.7 W/(m·K), while also retaining its electrical non-conductivity.
Requires a cure at only 80°C for 1.5 to 2 hours. Features a thixotropic paste consistency and adheres well to a variety of substrates such as metals, composites, glass, ceramics, and many plastics. It is formulated for bonding, sealing and small encapsulating applications.
Electrically insulating, with a volume resistivity greater than 1014 ohm-cm. Features a low thermal resistance of 6-10 x 10-6 K·m2/W and can be applied in very thin sections due to its ultra-fine particle filler. High strength system has a tensile modulus exceeding 1.5 million psi, and a compressive strength ranging between 25,000-27,000 psi.
Exhibits good dimensional stability with a low shrinkage upon cure, a Shore D hardness of 90-100, and an elongation of 0.5 to 1.5%. Serviceable over the temperature range of -50°C to +150°C and has a glass transition temperature of 110-115°C. Available in 3cc, 5cc, 10cc and 30cc syringes and ships in dry ice.
Master Bond
The new silver ink series exhibits excellent electrical conductivity and good adhesion to a vast array of substrates, particularly those within the LCD market.
Specifically designed to reduce surface and FPC static electricity in smartphone screens, notebook screens, and TV screens. Features wide-ranging capabilities, extended run time with continuous dispensing, no breakage in threads or needles, low temperature properties, excellent storage stability, excellent weather resistance and extremely fast cure time.
Scope of viscosity ranges from 3000 CPS to 20000 CPs with the low viscosity SCPT and SCPW-6 meeting the needs of spray valve dispensing and thin layer applications, whilst SCPH, SCPW and SCP-HV are more suited for needle valve dispensing and low volume shrinkage. Also shows excellent levelling performance with seamless ohmic contact and adhesion with the substrate. After complete cure, demonstrates solid electrical conductivity with volume resistivity at <10 -3 Ω.cm, ensuring swift and effective export of excess electrostatic charge through the system to avoid damage to the display panel. Available in a range of sizes including 5ml, 10ml and 30ml.
Electrolube
Press Releases
- 4FRONT Solutions Invests in Seica’s PILOT V8 NEXT Flying Probe Tester to Enhance Test Capabilities at DeLand, FL Facility; Mike Sementelli Comments
- FRANK Elektronik invests in high-precision SMT line with ASYS machines; Robert Both Comments
- SASinno Americas Opens State-of-the-Art Facility in Washington, Missouri to Support North American Manufacturers; Mike Young Comments
- ZESTRON Hosts Webinar on “Electronic Assembly Failures, Solutions and Lessons Learned for Long Term Reliability”