S300 diamond blade depaneling saw singulates assembled PCBs. Saw blade is a 2.95" diameter, .021" thick cutting blade.
 
Provides a stress-free method to singulate panels with sensitive surface-mount components close to the edge of the parting section, leaves a smooth edge finish with minimal stress  imparted to the PCB. Can also be used to singulate PCBs without scorelines, or to singulate PCBs with overhanging components on the parting line. Since the cutting depth can be set to just cut through the PCB itself, any components which overhang the parting line will remain intact. The working area of the saws are covered by a plexiglass enclosures.
 
The automatic, microprocessor-controlled, multiple-blade saw can be used for singulating side handling strips from DC/DC  converters or SIMM cards. An operator places up to five panels at one time into the input tray of the xy table. Pushing the start button activates the microprocessor-controlled process to bring the PCB past the saw blades to the offload position.  Up to eight blades can be set on a mandrell to cut multiple panels in one pass.
 
FKN Systek, Fknsystek.com

• Prev
• Next