Cascon Mission Assist is a graphical user interface for System Cascon JTAG/boundary scan software. Enables graphical project development based on predefined mission targets, while automating the context sensitive adaptation of all system tools and process controls. Provides support for various access technologies, such as boundary scan, processor emulation test, chip-embedded instruments, in-system programming, and core-assisted programming. Offers optimized test coverage and throughput provided by a definition of mixed test and programming strategies. Visualizes entire project development workflow based on a selected mission target, including automated process scripting and complete management of centralized project data.

Goepel electronic, www.goepel.com 

Cascon Mission Assist is a graphical user interface for System Cascon JTAG/boundary scan software. Enables graphical project development based on predefined mission targets, while automating the context sensitive adaptation of all system tools and process controls. Provides support for various access technologies, such as boundary scan, processor emulation test, chip-embedded instruments, in-system programming, and core-assisted programming. Offers optimized test coverage and throughput provided by a definition of mixed test and programming strategies. Visualizes entire project development workflow based on a selected mission target, including automated process scripting and complete management of centralized project data.

Goepel electronic, www.goepel.com 

ScanWorks’ FCT (FPGA-controlled test) turns field programmable gate arrays into circuit board testers. Drag-and-drop user interface performs validation, test and debug. Tester can be inserted, prototyped, and then removed. Automates practically all the FCT process. Instruments or instrument functions are selected from a library and matched with a description of one of the supported FPGA devices contained in another library. Automatically generates all of the constructs for the embedded tester, facilitates synthesis of instrument code into the firmware required by FPGA, and creates software image of the tester to program FPGA.

ASSET InterTech, www.asset-intertech.com 

Model 2401 SourceMeter instrument is optimized for high-precision test applications such as current vs. voltage (I‑V) characterization of photovoltaic cells, high brightness LEDs, low voltage materials, and semiconductor devices, as well as resistance measurements. Provides these capabilities at 20V and 1A signal levels. Operates and is programmed in the same way as the other Series 2400 family member units within its 1A/20V range boundaries. Integrates a stable DC power source with a true instrument-grade 5-1/2 or 6-1/2-digit multimeter in a single enclosure. Can act as a voltage source, a current source, a voltmeter, an ammeter, and an ohmmeter, and provides four-quadrant bipolar and automatic source/sink operation. Other applications include active/passive component test, voltage/current/resistance measurements; battery operation validation for portable electronic devices; characterizing implantable medical devices; characterizing low-leakage electronic device/circuits (forward/reverse, transistor gain/leakage); calibrating 3-1/2- to 4-1/2-digit data acquisition boards, meters, and DMMs.

Keithley Instruments Inc., www.keithley.com

Positive cavity displacement "H" series pumps provide volumetric dispensing and are compatible with epoxies, thermal greases, underfills, oils, silicones and UV encapsulants, and other non-electronics materials. Is for GPD Global platforms, and may be used with other robots or tabletop operations.

GPD Global, www.gpd-global.com

Positive cavity displacement "H" series pumps provide volumetric dispensing and are compatible with epoxies, thermal greases, underfills, oils, silicones and UV encapsulants, and other non-electronics materials. Is for GPD Global platforms, and may be used with other robots or tabletop operations.

GPD Global, www.gpd-global.com

SN100C (551CT) fluxed-cored solder wire combines the benefits of a eutectic lead-free alloy with a robust, high-temperature capable cored flux for high-speed sequential soldering. Formulated for soldering tip temperatures up to 380°C with good tip separation for reduced icicles, permitting fast wetting and high spreadability. Ag-free stable microstructure accommodates long-term and impact strains. For high-speed robotic soldering. Good wetting and high spread factor.

Nihon Superior, www.nihonsuperior.co.jp/english/

SN100C (551CT) fluxed-cored solder wire combines the benefits of a eutectic lead-free alloy with a robust, high-temperature capable cored flux for high-speed sequential soldering. Formulated for soldering tip temperatures up to 380°C with good tip separation for reduced icicles, permitting fast wetting and high spreadability. Ag-free stable microstructure accommodates long-term and impact strains. For high-speed robotic soldering. Good wetting and high spread factor.

Nihon Superior, www.nihonsuperior.co.jp/english/

No. 970 is a 500ºF electrically-heated, Class 100 cleanroom oven, currently used for sterilizing, depyrogenation, curing and drying workloads. Workspace measures 36" x 42" x 66".  30KW are installed in Incoloy-sheathed tubular elements to heat the oven, while a 2400CFM, 3-HP recirculating blower provides horizontal airflow to the workload. Features 4" thick insulated walls throughout, aluminized steel exterior, Type 304 2B-finish stainless steel interior with continuously backwelded seams, exterior finished with white epoxy paint, #4 brushed finish stainless steel door and control panel face. Includes a 4" insulated floor with removable truck wheel guide tracks. Has a 325CFM stainless steel powered forced exhauster, two 24" x 30" x 12" thick stainless steel high-temperature HEPA recirculating air filters, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and a 10" diameter circular chart recording temperature controller. 

The Grieve Corp., www.grievecorp.com

New packaging and labels are available for DMP6-10, DMP8-10 and DMP16-10 inserts. Packaging provides enhanced protection of the DMP inserts during shipping and handling. Prevents contaminants from coming in contact with DMP insert assemblies during storage. Each package has two labels, one affixed to the box and one attached to the inside bag. Labels contain part numbers, descriptions and lot numbers for tracking purposes.

Techcon Systems, www.techconsystems.com

Micro-Coil Spring Array is an alternative to standard rigid arrays. Designed to replace column grid array (solder columns) commonly used on ICs with high lead counts. Is a drop-in replacement for BGA column grid array packaging applications that require greater reliability and long-term robustness. Developed by NASA.

STI Electronics Inc., www.stielectronicsinc.com

I-prober 520 positional current probe observes and measures current in printed circuit board and other conductors without the need to break or surround the conductor. Used with an oscilloscope, this compact, handheld probe provides a bandwidth of DC to 5 MHz and a dynamic range of 10 mA to 20 A pk-pk. When user places insulated tip onto the conductor, the current flowing in the track can be observed and measured. Operates by sensing the field in close proximity to the track. Employs miniaturized version of a fluxgate magnetometer. Has a safety rating of CAT II, 300 V (CAT I, 600 V) and is suitable for connection to any 1-MΩ input of an oscilloscope. Comes with control box and calibrator, power supply, and a clip-on toroid assembly.

Aim-TTi, www.tti-test.com/products-tti/precision/iprober520.htm