Continuous Path Motion Control software for jetting underfill for flip chips optimizes dispense head motion, saving time and increasing units per hour. Instead of stopping to move between die, backtracking, ramping to speed, dispensing, and decelerating, the head maintains a continuous speed and direction throughout the process. Improves overall cycle time by 27% under certain conditions.

Nordson Asymtek, www.nordsonasymtek.com

5R6-900 benchtop laboratory temperature controller has ramp/soak capabilities. Single enclosure device plugs into wall as a self-contained temperature control system. Can be used universally, wherever user is located. Solid-state MOSFET bidirectional compact unit features internal power supply and handles load currents up to 10A. PC programmable. Features digital display for controlling functions, including adjusting output voltage and setting the desired temperature. Auto output shuts down unit if sensor is opened or shorted.

Oven Industries, http://www.ovenind.com

NCM5000 dispense pump has two wetted parts -- a flexible diaphragm and nozzle plate -- and no seals or springs to replace or adjust, to simplify field operation. Uses a high-speed pneumatic solenoid to drive jetting action. Offers continuous frequency of up to 300Hz. Main body of pump has built-in non-wetted heater to maintain fluid temperature for consistent results. Priming volume is 0.09 cc, minimizing lost materials and maximizing production per fluid reservoir. 

Replaceable diaphragm is impregnated with carbide ball and available in different materials for fluid compatibility. Nozzle plate can be configured with durable ceramic nozzles in a variety of sizes. Nozzles are field replaceable and require no adjustments once replaced. For UV encapsulants, underfills and SMT adhesives.

GPD Global, www.gpd-global.com

OhmegaPly MTR permits thin-film resistors to be built within a printed circuit trace less than 0.004" wide. Using standard subtractive printed circuit board processes, it is for high density interconnect designs where passive component placement is difficult.

Omega Technologies, www.ohmega.com
 

SmartHolder bracket is designed to keep SuperSaturated SmartWipes canisters accessible. Is made from spring steel wire that expands for loading and unloading. Has a white powder coat finish. Is equipped with wall mounting plate on the back side and a bench mounting plate located on the bottom side of the holder. Wall mounting plate comes with a 3" x 3" adhesive pad. Can be grounded with a ground strap.

JNJ Industries, www.jnj-industries.com

Scanflex Designer Studio boundary scan test system is for test and debug tasks in design and production stages. Hardware is preconfigured for use with embedded system access technologies such as ChipVORX and VarioTAP. Can be extended by additional I/O modules. Hardware/software bundle contains the Scanflex controller SFX/Combo1149-A and System Cascon Development Station software type Basic/SX, Standard/SX, or Standard with add-on option Scan Vision Layout.

Goepel electronic, www.goepel.com

4000 Optima Bondtester has a multifunction cartridge. Key pad features programmable nudge buttons for positional alignment. Includes dual vibration reduction mount and adjustable eye-line. Can include a camera through the microscope to record the test. Uses Paragon software, providing semiautomatic test routines, automatic GR&R calculation, database search engine wizard and data reporting.

Nordson Dage, www.nordsondage.com

Temperature sensor probes, from thermistors and thermocouples to resistance thermometers, are offered in the “Temperature Sensor Selection Guide.” The guide shows tolerance level, model number, temperature range and key details about five sensors offered. Sensor probes are integrated with other PID temperature controller systems. Sensors have a tolerance of up to ±0.1°C. Each sensor can be customized.

Oven Industries, www.ovenind.com

ESD Audit Kit Model 511/1501 includes Ionizer Kit Model 511 Electrostatic Field Meter with charger and charge plate and Model 1501 Surface Resistance Meter. Is for electronics, flat panels, photovoltaics, plastic/polymer/film processing and semiconductors. Applications include air ionizer verification, electrostatic decay auditing and monitoring, testing of floor materials and systems, and resistance measurement (surface, volume, two-point) of work surfaces, static dissipative materials and seating. Model 511 Electrostatic Field Meter can operate at two ranges: 0 to +/-2 kV per in. or 0 to +/-20 kV per in.; reportedly obtains accurate measurements in ionized or non-ionized environments. Can be used for testing balance and +/- decay capabilities of ionizers. Complies with ANSI/ESD SP3.3. Model 1501 Surface Resistance Meter offers a measurement range from 10E+3 Ohms to 10E+12 Ohms. Complies with several IEC and ANSI/ESD standards.

TREK Inc., www.trekinc.com

YSD SMT dispenser has a tact time at 0.07 sec./shot Performs a variety of dispensing functions in addition to temporary adhesive application. Handles PCBs up to 510mm in length and 460mm in width. Meets CE marking requirements. Compressed air level 0.45 MPa.

Yamaha Motor Co., www.global.yamaha-motor.com

Plato XT soldering tips come in 19 different styles. Are compatible with Weller WX stations using WXP120 iron. Tip geometries include conical, screwdriver, bevel, knife, and SMD flow tip.

Two new sponges fit Hakko FX-888 and FX-888E stations. Slitted sponge is designed to capture solder while wiping off tip. Sponge with the large hole adds surface area for wiping. Both are made of cellulose.

Techspray, www.techspray.com