Updated XJTAG software reportedly increases flexibility for easier access to JTAG capabilities of boards and maximum test coverage. Dynamic chain profiling helps initialize boards with multiple JTAG chains, in which a device in one JTAG chain controls power supplies or reset lines for JTAG devices in other chains. During flash programming, can be set up to clock only JTAG data through the chain needed for programming operation. Can remove need to clock hundreds of bits of data per scan; speeds testing/programming. Increases capabilities of XJLink2 JTAG controller.

XJTAG, www.xjtag.com

Tuff Trac ESD Lo-CHAR technology is a dual-layer, PVC-based electrostatic discharging mat for use on floors and work surfaces where static discharge may be harmful. Mats are designed for use in monitored environments to perform at range of 10⁶ to 10⁸. Are manufactured with PVC that includes a blend of flame-retardant and low smoke chemistry. Meet ASTM standards for both smoke and flame resistance per NFPA Life Safety Code 101. In tests, reportedly barely sustained flame after 4 min. of continuous exposure and self-extinguished at 6 min.

The Biltrite Corp., http://biltrite.com/lochar/

White solder resist Elpemer SD 2491 SG-TSW-R6-B has excellent yellowing resistance after Pb-free reflow soldering and high thermal loads. Has thermal cycling test resistance of 500 cycles between -40 and 125°C. Has a reflectivity of ≈ 90% at 460nm and a yellowing resistance of Db ≈ 1,2. Is for LED applications in automotive electronics.

Lackwerke Peters, www.peters.de

Solvent-free thick film coatings Elpeguard Twin-Cure FP 115-0304 and FP 115-0306 were developed for LED curing at a wavelength of 395nm, followed by air humidity crosslinking in shadow areas. After UV curing, FP 115-0304 is tack-free within one hr. and inline-capable. Is best suited for protecting assembled printed circuit boards. FP 115-0306, once UV cured, takes longer to be tack-free; is good for all lighting electronics applications. Both reportedly have outstanding chemical, climatic and mechanical resistance.

Lackwerke Peters, www.peters.de

ULT 1500 and ULT 2500 are designed for removal and filtration of hazardous substances in dust, laser fume and welding smoke. Use conic filter cartridges. Dust deposits are collected in a removal container for low contamination disposal. Can be adapted to various process conditions. Can select extraction position. Feature optional swing check valve to protect pipelines. Can be used in limited spaces. Systems have front access. Rotary nozzle de-dusting reduces compressed air consumption. Filtered air can be fed back to working area.  

Ultag, www.ult.de

Huntron Tracker 3200S, for power-off diagnostic testing during circuit board repair, has variable range parameters for hundreds of voltage, source resistance and frequency combinations. Most popular combinations can be saved. Color touchscreen display controls other features, such as built-in Pulse Generator, front panel pin selection and Channel A/B settings. Workstation software automates analog signature analysis (ASA) based tests by creating a test plan, capturing signatures, comparing to stored signatures and viewing the results. Automatically stored for sharing on demand. Includes self-paced Huntron ASA Training Course with printed circuit assembly, MP20 microprobes (one pair), common test leads, two blue clip leads, 20 and 40 pin DIP clips.  

Techni-Tool, www.techni-tool.com

Prism 500 comes with new options for applying conformal coatings to printed circuit boards. Teach camera and offline programming tool increase ease of creating coating recipes. Teach camera option is fully integrated with the GUI for ease of programming and process verification. Nozzle-less ultrasonic spray technology permits thin, uniform application of a variety of coatings. Configurable with ultrasonic spray head, digital dispensing valve, dual-mode spray valve and dispensing valve. 

Ultrasonic Systems Inc., www.ultraspray.com

V4 assembly cell has machine vision guidance, for assembly of small components on devices such as cameras, microphones, speakers, touch screens and vibras. No special operator skills needed. Is modular, for flexibility and cost effectiveness. Desktop-sized, with a footprint of 0.35 m², and with numerous feeding options. Inline and offline versions available.

JOT Automation, jotautomation.com 

T245-C soft thermal insulator handle features soft foam grip for thermal insulation.

For jobs with high power requirements (e.g., ground plane soldering). Its ergonomics and short tip-to-drip distance are said to improve accuracy and comfort. Filters aid easy replacement of damaged grips. Cartridges can be changed using quick cartridge extractor. Works with C245 cartridges.

JBC Tools, jbctools.com

Barricade provides fast, nondestructive authentication of electronics components. Is comprised of electronics component signal acquisition hardware and software. Validation process involves placing IC into a chip socket to receive confirmation of authenticity or detection of counterfeit or cloned components within seconds. Works on analog and digital devices. Determines authenticity based on electrical signatures and a classification algorithm that generates identity signatures for each class of chips in a given class of authentic devices. Requires only a few authentic chips to enroll an entire class of chips.

Battelle, http://www.battelle.org

UVCL UV cure conformal coating is VOC-free and for high-volume use. Is said to cure within seconds upon exposure to UV light and within 48 hr. in shadowed areas. Features storage stability and long shelf life. Is low viscosity, for application of relatively thin films without need for dilution, and provides moisture and chemical resistance. Is nonflammable, fluoresces under UV light for ease of inspection, and offers electrical properties with a wide operating temperature range. Adaptable for different processes and resistant to common thermal shock cycling, moisture vapor, salt-spray, solvent and fluid exposure, and condensing environments. Meets IPC-CC-830 requirements and is UL94 V-0 rated.

Electrolube, www.electrolube.com

AFA (Aromatic Free) conformal coatings are said to reduce operational hazards for operators due to Toluene and Xylene-free formulation. Consists of AFA, AFA-F, formulated for use in non-atomized film-coat applicators, and AFA-S, for use in atomized spray applicators and HVLP spray guns. Transparent AFA coating is for LED applications, providing clarity and UV resistance, and protection in humid and salt-mist environments, as well as ensuring efficient coating application with a fast touch dry time at room temperature. Is UL approved, meets UL94 V-0. Features UV trace to aid inspection and is reworkable.

Electrolube, www.electrolube.com