K7000 circular linear blade depanelizer singulates pre-scored PCBs with tight component spacing. Linear blade is 12" (304mm) long and has a 0.030" (0.762mm) thin symmetrical cutting edge designed for PCBs with closely spaced components. Circular blade is 3.8" (71mm) in diameter and has the same cutting edge profile as the linear blade. -- 0.030" (0.762mm) Blade is mounted on a shaft with centerline of the cutting blade passing directly through the middle of the support bearing. By placing the score-line on the linear blade and pulling the circular blade carriage across the upper score-line the panels can safely be singulated with minimal effort. Additional tooling available for safe board placement and handling during singulation.
FKN Systek, www.fknsystek.com
J-STD-001F certification soldering kit, for hand soldering certification to the newest standard, allows the trainer to administer training in tin-lead and lead-free RoHS compatible solders. Exceeds minimum requirements of J-STD-001F for soldering. It said to be an effective, cost-effective way to train and evaluate students and employees. Contains a variety of standard surface mount and through-hole components with traces to simulate real world situations. Comes individually boxed with all components bagged and labeled for easy identification. Conforms to J-STD-001E standard for soldering. Training center and bulk discounts available.
BEST Inc., www.soldertools.net
The 4800 wafer level bondtester was developed for testing wafers from 200mm up to 450mm. Paragon software provides flexibility for the creation and mapping of wafers, enabling setup of test patterns. Virtual images for each test pattern reportedly enable easy editing.
Nordson Dage, www.nordsondage.com
MP-520 SiP inspection system combines precision linear drive motor technology with 25MP CoaXPress camera, 3D confocal measurement system and Omni-vision 3D digital multi-frequency moiré technology. Is configured with eight phase color lighting and four 10MP side-view cameras. For measurement and inspection of solder ball/bumps, bond wire, chip bonds, discrete devices, heat sinks, underfill, printed circuit boards, and packages. Results are stored in a central database, enabling remote access SPC data through Intellisys total quality management system software.
Mirtec, www.mirtecusa.com
Adjust-a-Vac vacuum tweezer is for handling very thin/delicate substrates, wafers, MEMS devices and other fragile components. Can adjust vacuum level from 1-10" of mercury. Integrated 10-segment bar graph display shows vacuum level present during operation. Bar graph shows minimum vacuum pressure until part is grasped, then displays vacuum level presented to the part being handled. Vacuum port integrates a user-replaceable inlet filter.
Virtual Industries, www.virtual-ii.com
Master Bond MasterSil 912Med is a room temperature vulcanizing silicone system for bonding, sealing and coating. Meets USP biocompatibility and ISO cytotoxicity standards and resists a variety of sterilization techniques such as gamma radiation, EtO and some types of liquid sterilants. A one-part material offers noncorrosive cure with a tack-free time of 15-30 min. at room temperature. Translucent color; serviceable over temperature range of -75°F to +400°F. Tensile strength 700-1,100 psi. Adheres to metals, composites, ceramics, glass, rubbers, plastics and other silicone substrates. Elongation 250-350%. Volume resistivity of >1015 ohm-cm. Comes in 80g tubes and has a shelf life of 6 months.
Master Bond, masterbond.com/tds/mastersil-912med
Press Releases
- Robert C. Donovan Joins DISTRON CORPORATION, Marking the Third Generation in Family Leadership
- Incap UK Invests in SMT Technology as Part of Long-Term Operational Development
- Evolve Manufacturing Celebrates 100 Years of Combined Leadership in Medical Device Manufacturing; Noreen King Comments
- STI Celebrates Christy Hill’s 20 Years of Dedicated Service; David Raby Comments