Hanover, Germany, November 2020 – Viscom's proven S3088 CCI inspection system ensures high-precision conformal coating inspection of printed circuit boards. The system quickly and reliably detects typical defects such as cracks, coating voids, smearing and splashing. Layer thickness and wet coating can also be analyzed. The S3088 CCI now comes standard with an unmatched upper transport clearance of 105 mm, thus providing even more flexibility during final inspection of fully assembled components.
Conformal coating is becoming increasingly important in electronics manufacturing. Coating is applied wherever electronic components need to be protected against damaging environmental influences. This is especially the case for safety-relevant applications. The rapid and continued development in electromobility and autonomous vehicles, as well as the growth of wind energy, have made this production step all the more essential. The insulating effect of conformal coatings responds to the trend toward miniaturization by allowing the distance between conductor paths to be reduced.
The inspection process uses white light and special UV LEDs which reliably reveal defects in UV-sensitive conformal coating. The S3088 CCI's flexible inspection algorithms can be rapidly adapted to various conformal coatings. Optimal inspection coverage is ensured by means of one orthogonal camera in combination with four, or optional eight, angled view cameras, which allow for accurate inspection of component sides and gaps between pins. With a maximum orthogonal resolution of up to 15 μm/pixel and an angled view resolution of up to 17.5 μm/pixel, the S3088 CCI inspects all typical defects with 100% reliability — and thanks to the standard four, or optional eight, side views, inspection results are free of shadowing. Special high-powered LEDs are used for the inspection of poorly reflecting
Contact: Astrid Sassen · Phone: +49 511 94996-775 Mobile: +49 151 116 262 35 Email: email@example.com Viscom AG · Carl-Buderus-Str. 9 - 15 · 30455 Hanover, Germany coatings, such as conformal coatings which are very thin or coatings which contain silicone. The system also provides layer thickness measurement (3D spot measurement), nanolayer inspection and wet coating inspection. Additional inspection of selected post-reflow criteria, such as OCR and displacement, is also available. The camera system works with the vVision or EasyPro inspection software, thus offering the same user interface as other AOI systems in the proven S3088 family. Inspection program creation is hence quick and easy. As a result, traceability concepts, special inspections such as reading labels with data matrix code (DMC) and other production-relevant features can be implemented effectively. Moreover the documentation of all process data is guaranteed.