Products
SynTECH-LF RoHS-compliant, Pb-free, no-clean solder paste is made with 100% synthetic poly adduct components. Compatible with tin/silver and tin/silver/copper alloys, with Pb content <200ppm. Reportedly delivers high hourly throughput with less scrap and rework, lot-to-lot and stencil printing consistency, wide process windows (12-hour stencil life, 12-16 hour tack) and 90% metal loading. Good for ICT, is compatible with OSPs without compromising SIR values. Is non-conductive and non-corrosive, with post reflow residue that acts as a protective coating and can be removed using t cleaners. Available in jars, cartridges, syringes and cassettes.
Amtech, amtechsolder.com
Amtech, amtechsolder.com
Booth 812
The compact X-100 reflow oven incorporates Phase Convection technology to offer flexibility and low cost of ownership. Was developed to provide enhanced quality control, enabling individual thermal profiling on a board-by-board basis and thermal performance within the confines of Pb-free soldering.
Provides enhanced temperature uniformity and lower nitrogen usage and power consumption. Unit length is 3,350 mm, uses SPC control with pyrometers. Features a self-cleaning capability and is environmentally friendly.
X-600 Phase Convection system features a hermetically sealed loading system by which boards are loaded into one of the three levels. Each phase unit has a re-circulating convection system in which the temperature is regulated by a pyrometer that measures the exact temperature of the board, not the surrounding air. These measurements can be monitored by an on-system SPC data collection tool for traceability and closed loop control.
eXelsius, a ViTechnology brand, www.vitechnology.com
Provides enhanced temperature uniformity and lower nitrogen usage and power consumption. Unit length is 3,350 mm, uses SPC control with pyrometers. Features a self-cleaning capability and is environmentally friendly.
X-600 Phase Convection system features a hermetically sealed loading system by which boards are loaded into one of the three levels. Each phase unit has a re-circulating convection system in which the temperature is regulated by a pyrometer that measures the exact temperature of the board, not the surrounding air. These measurements can be monitored by an on-system SPC data collection tool for traceability and closed loop control.
eXelsius, a ViTechnology brand, www.vitechnology.com
Elektrobit exhibited a range of equipment at Productronica in November. The focus was on a complete JOT Automation line, featuring a Bare Board Unstacker, Laser Marker, Segment Conveyor, High-Speed Router and Single Flat Belt Conveyor.
J904-033 Tray Feeder Vivian Ultra features fast tray feeding using two shuttles and a compact tray feeder to enhance tray transportation to and from the robot working area. The tray dimensions and tray feeding height are adjustable to accommodate a range of product sizes.
J501-44 High-Speed Router uses grippers to hold the panel in place, ensuring short cycle duration. Cutting speed is up to 60 mm/s, depending on the layout and material of routed product, with a cutting accuracy of ±0.15 mm.
J401-11 Tiny Test Handler was shown with new display tester software, able to test small LCD displays, keyboards and housings of electronics equipment. It claims to offer high accuracy display defect detection and immunity to significant variations in illumination, part orientation and the display’s protection tape.
Elektrobit Group Plc, elektrobit.com
J904-033 Tray Feeder Vivian Ultra features fast tray feeding using two shuttles and a compact tray feeder to enhance tray transportation to and from the robot working area. The tray dimensions and tray feeding height are adjustable to accommodate a range of product sizes.
J501-44 High-Speed Router uses grippers to hold the panel in place, ensuring short cycle duration. Cutting speed is up to 60 mm/s, depending on the layout and material of routed product, with a cutting accuracy of ±0.15 mm.
J401-11 Tiny Test Handler was shown with new display tester software, able to test small LCD displays, keyboards and housings of electronics equipment. It claims to offer high accuracy display defect detection and immunity to significant variations in illumination, part orientation and the display’s protection tape.
Elektrobit Group Plc, elektrobit.com
Press Releases
- 4FRONT Solutions Invests in Seica’s PILOT V8 NEXT Flying Probe Tester to Enhance Test Capabilities at DeLand, FL Facility; Mike Sementelli Comments
- FRANK Elektronik invests in high-precision SMT line with ASYS machines; Robert Both Comments
- SASinno Americas Opens State-of-the-Art Facility in Washington, Missouri to Support North American Manufacturers; Mike Young Comments
- ZESTRON Hosts Webinar on “Electronic Assembly Failures, Solutions and Lessons Learned for Long Term Reliability”