Select Coat SL-940E conformal coating dispenser is said to have up to 30% faster throughput, a vision system, closed-loop process controls, traceability, and advanced integrated software. A motion system attains 750 mm per sec. speed and 1 g peak acceleration. Accommodates product sizes up to 500 mm. Enables velocity with up to 2 kg payload. Has a dispense area of 500 x 475 mm. Viscosity control system and SC-204 and SC-205 film coater modules are available. The Swirl Coat SC-300 applicator is a three-mode swirl system, while the PreciseCoat SC-400 jet applicator can be used for high selectivity applications. Downdraft and spill containment are integrated.
The film base connector is said to provide a small space interconnection with high-density flexible circuits. Micro bump arrays built on thin film substrates reportedly reduce the thickness of the connection height by more than 70% to 300 µm thick for over 100 pins.
With printable flexible electronics, finer patterns than 30 µm line and space reportedly can be generated with smaller via holes than 80 µm diameters for double sides or multi-layer flexible circuits. The multiple screen printing processes enable embedded passive for all of LCR and active components with thin flexible substrates, including polyimide and polyethylene naphthalate films.
The XiDAT XD7500NT digital x-ray inspection system is said to have submicron inspection capability and sealed tube technology. Reportedly provides oblique angle viewing of up to 70° for any position 360° around any point of the 18" x 16" inspection area. Comes standard with the Dage NT x-ray tube; provides feature recognition to 950 nm. Real-time digital inspection of 1.3 MP viewed on a 20" flat panel LCD display. System magnification up to 7,400x. Is equipped with ImageWizard software.