Circuits Assembly Online Magazine - Current Issue

Products

No. 887 is a gas-fired 1000°F cabinet oven used for curing metal coatings onto parts. Workspace dimensions measure 38” x 38” x 38”. 175,000 BTU/HR installed in a modulating natural gas burner provide heat, while a 2,000 CFM, 2-HP stainless steel recirculating blower furnishes a horizontal airflow across the workload. Features an aluminized steel exterior, Type 304, 2B finish stainless steel interior, plus inner and outer door gaskets that seal against the door plug and front face of the oven. Has 8” thick insulated oven walls, consisting of 2” of 1900°F block and 6” of 10 lb/cf density rockwool insulation. Safety equipment is onboard as required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster. Digital indicating temperature controller is provided.

The Grieve Corp., www.grievecorp.com

Explorer real-time monitoring uses DataMan barcode reader. Incorporates scalable architecture, a web-based performance statistics interface, and novel vision technology. Trends read rates, evaluates images from packages that were not read and classifies those images. Connects to a network of DataMan readers and regularly pulls read rate information and images from packages. When a process error results in a package with an unread barcode, images are sent; automatically evaluates and categorizes each image and stores them in a database.

Cognex Corp., http://www.cognex.com

PSV3000 automated programming system uses FlashCORE III programming engine; combines programming technology with intelligent system integration. Includes pick-and-place technology and vision system. Is reportedly capable of delivering up to 1000 parts per hr. in tape and tray configurations. Supports up to 16 individual programming sockets and all device types, including FPGAs, CPLDs, microcontrollers, and flash memories, including serial flash, eMMC, NAND and NOR devices.

Data I/O, www.dataio.com/PSV3000