Products
Updated XJTAG software reportedly increases flexibility for easier access to JTAG capabilities of boards and maximum test coverage. Dynamic chain profiling helps initialize boards with multiple JTAG chains, in which a device in one JTAG chain controls power supplies or reset lines for JTAG devices in other chains. During flash programming, can be set up to clock only JTAG data through the chain needed for programming operation. Can remove need to clock hundreds of bits of data per scan; speeds testing/programming. Increases capabilities of XJLink2 JTAG controller.
XJTAG, www.xjtag.com
Tuff Trac ESD Lo-CHAR technology is a dual-layer, PVC-based electrostatic discharging mat for use on floors and work surfaces where static discharge may be harmful. Mats are designed for use in monitored environments to perform at range of 106 to 108. Are manufactured with PVC that includes a blend of flame-retardant and low smoke chemistry. Meet ASTM standards for both smoke and flame resistance per NFPA Life Safety Code 101. In tests, reportedly barely sustained flame after 4 min. of continuous exposure and self-extinguished at 6 min.
The Biltrite Corp., http://biltrite.com/lochar/
White solder resist Elpemer SD 2491 SG-TSW-R6-B has excellent yellowing resistance after Pb-free reflow soldering and high thermal loads. Has thermal cycling test resistance of 500 cycles between -40 and 125°C. Has a reflectivity of ≈ 90% at 460nm and a yellowing resistance of Db ≈ 1,2. Is for LED applications in automotive electronics.
Lackwerke Peters, www.peters.de
Press Releases
- Kurtz Ersa Partners with E-tronix for Sales in Illinois and Wisconsin
- XLR8 EMS Welcomes Raul Jorge Lopez Jr. as Director of Program Management and Procurement
- Koh Young America Promotes Ramiro Mora to Lead Service and Applications in Mexico and South America
- ViTrox Americas Welcomes Huy Pham as Technical Support Engineer