Products
MPM Momentum BTB (back-to-back) printer is 200mm shorter than the standard Momentum, with an overall length of 2.8m for the two machines. Is configured for back-to-back processing; enables dual-lane processing with the combined output of two machines. Is designed with all-front access to electrical system, solvent reservoirs, etc. Wet Print accuracy is 20µm@6ó, Cpk ≥ 2.
Speedline Technologies, www.speedlinetech.com
Unitech UC-250M-CV PCB board cleaner is built on the platform of the UC-250M and adds dual-cleaning using a combination of a brush roller with silicone/adhesive cleaning rollers; is a combination dual dust removal system. Cleans top surface of printed circuit boards, and chip components attached to bottom side. Features an antistatic bar (ionizer) to neutralize static and prevent dust from collecting on board surface. Offers forward and reverse conveyor modes and multiple auto-passes.
Unitech, http://www.ute.com/index.php?rbu=5
OvenProbe is designed to measure a conventional reflow oven’s performance. Is designed for use after machine maintenance to benchmark the machine’s thermal transfer performance. Offers three matched thermal masses at the top and bottom that measure oven uniformity across the conveyor width, allowing the top and bottom heaters’ effects to be measured. Large thermal masses quantify the heating capability of the oven. Air temperature sensors permit heater and speed measurements.
SolderStar, www.solderstar.com
