caLogo

News

View Engineering Inc. (Simi Valley, CA), a designer and manufacturer of vision measurement systems, has announced the integration of linear motors into their View Summit series of large format, vision measurement/inspection systems. Linear motors are not subject to the same velocity and acceleration limitations inherent in systems converting rotary to linear motion, such as lead screw systems.

The integration of linear motors provides the platform with the higher velocities and accelerations needed to satisfy near-line measurement/inspection requirements. The systems operate precisely to 0.1 micron at velocities ranging from 400 to 500 mm/sec. The combination of precision and speed is critical in addressing the process monitoring and quality improvement needs of manufacturers challenged by higher manufacturing volumes, decreased design geometries and tighter tolerances.

The inspection system's design features include a fixed bridge design with a heavy-duty granite base and arch, passive vibration isolation system and non-contact stage encoders offering 0.1-micron resolution. Available in a variety of sizes, it can measure large footprint parts such as printed circuit boards (PCBs), stencils, flat panel displays, etching sheets and mask patterns, as well as nested groups of smaller parts.

www.vieweng.com

 

Copyright 2004, UP Media Group. All rights reserved.

Read more ...

Cookson Group plc (London, UK), an international materials technology group, has announced that John Sussens joined the Board as a non-executive director on May 1, 2004. He has been an executive director of Misys plc, a software products and solutions company, since July 1989 and group managing director since 1998.

Sussens has a long record in the manufacturing sector. He started his career with the Ford Motor Co., and prior to joining Misys was managing director of JCB Manufacturing, a construction and agricultural equipment manufacturing company.

The company also recently released its results for the first quarter of 2004. The electronics division continued to benefit from the recovery in the electronics industry that began to take hold in the second half of 2003, as well as from the actions taken over the past three years to reduce its cost base and optimize capacity.

Sales for Q1 were 18% higher than the same quarter last year at constant exchange rates and up 10% at reported rates. First quarter sales were also marginally higher sequentially. Activity in the Asia-Pacific region continued to grow strongly; in the U.S., a gradual improvement has been underway since the end of the third quarter of 2003; however, in Europe no improvement in underlying demand has yet been seen. As a result of increased levels of activity and a lower cost base, operating profit of $19.5 million for the first quarter of 2004 was more than $16 million higher than the same period last year, at both constant and reported exchange rates.

Q1 sales of laminates were 21% higher than the same quarter last year. Having operated at a loss of some $8.9 million in the first quarter of 2003 and near break-even in Q4 2003, the sector's profitability continued to improve and a modest profit was recorded in the month of March 2004. Further improvements are expected to arise in the second quarter as the program to optimize production capacity at the sector's U.S. West Coast facility nears completion and in-house production of the GETEK product range increases in both the U.S. and Asia-Pacific.

In the chemistry division, sales for the quarter were 16% higher than last year. Profitability improved markedly, more than doubling year-on-year, although profits were boosted in the first quarter by a surge in high margin sales in the sector's Japanese joint venture.

Assembly materials sales were 18% ahead of last year. Sales were inflated by a 45% year-on-year increase in the price of tin although the sector was better able to pass on the impact of this than in the fourth quarter of 2003.

Operating profit for the Group's continuing operations was $42.5 million, $23 million higher than Q1 2003. Profit before tax in the first quarter was $32 million, compared to a loss of $1.7 million in the first quarter of 2003.

www.cooksongroup.co.uk

Copyright 2004, UP Media Group. All rights reserved.

Read more ...

UP Media Group Inc. (UPMG, Atlanta, GA) has announced that PCB Design Conference West, the annual West Coast conference and exhibition for printed circuit board (PCB) engineering, design and manufacturing professionals, will return to the Santa Clara Convention Center in Santa Clara, CA, on March 7-11, 2005. Long held in Santa Clara, PCB West has been held at the San Jose Convention Center for the last two years.

 

"The San Jose Convention Center is a terrific venue and we really enjoyed holding the show there," said UPMG president Pete Waddell. "However, there are a lot of positives about the Santa Clara Convention Center that our attendees, exhibitors and staff alike appreciate. For example, the SCCC facility is located just off Highway 101 on Great America Parkway, which results in easy access from all parts of Silicon Valley by rail or car. Parking is free, and two great hotels—the Westin Hotel Santa Clara and Hilton Santa Clara—are literally only steps away from the convention center lobby."

 

Sponsored by industry trade magazines Printed Circuit Design & Manufacture and Circuits Assembly, PCB West annually provides attendees and vendors with a conference and exhibition for the design and manufacture of advanced circuits, printed circuit boards (PCBs) and related technologies.

 

PCB West will provide attendees with a five-day conference program featuring a three-day Technical Conference of short courses and papers and two days of in-depth Professional Development Certificate Curriculum courses. The two-day product and service exhibition will be held on March 8-9.

 

UPMG is a privately held company that specializes in magazine publishing and trade show and conference production. UPMG currently publishes Printed Circuit Design & Manufacture and Circuits Assembly. In addition, UPMG produces two annual conferences and trade shows for the design and manufacture industry—PCB Design Conference West and PCB Design Conference East in the Boston area. UPMG also hosts the PCB Design Conference Road Series of courses in cities throughout the U.S.

 

www.pcbwest.com

 

Copyright 2004, UP Media Group. All rights reserved.

Read more ...

Page 4907 of 4976

Don't have an account yet? Register Now!

Sign in to your account