Maynard, MA — QuadTech Inc., an electronic test equipment manufacturer in the passive component, electrical safety and cable test marketplace, announces the availability of its Fusion High Voltage Cable Analyzers for testing wire, cable and harnesses for opens, shorts and mis-wires.
 
Eight models are available with choices that include individual or a combination of AC and DC Hipot test capability, and pin counts to the device under test of 36 or 72 points. Its PC-based intuitive graphical touch-screen makes for easy setup and operation. The automated system allows for custom test programming without the need for scripting. Through component recognition, cable assemblies can be learned and test programs generated automatically.
 
Comprised of a control box and switching box, is ideal for high-volume production testing. Features include:
 
AC Dielectric Withstand Testing 50 to 3500V;
DC Dielectric Withstand Testing to 50 to 3000V;

Insulation Resistance Measurements to 100 Gohms;
Capacitance Measurements from 100pF to 1000μF.
 
Also offers auto learn, component testing, reports generation and several standard interfaces. Can function as a stand alone system or integrated into a larger automated system using digital inputs and outputs.
 
QuadTech, www.quadtech.com 

EA3200H RF absorber matrix proves a measurable effect from 40 MHz to 5 GHz depending on freqency, existing circuit load and are covered by the patch. Peak performance is 3.2 to 5.0 GHz. Easy way to gain 1 to 2 dB without invasive circuit changes.

Installs by removing protective adhesive liner. Available in 6 x 8" (152 x 203 mm) sheets with 24 patches per sheet.

FerriShield Inc., www.ferrishield.com

Compatible with all Siemens Siplace family machines, the feeder range currently includes 12/16, 24/32, 44 and 56 mm tape feeders. Additional solutions will be added during this summer.

Reversible index drive and other operator-friendly features make component changeovers faster and more accurate.

Has high-visibility status indicators, a complete software diagnostic feature set that includes pick point calibration and a modular design that allows each feeder to be maintained in-house - without the need for expensive ancillary equipment or the need to ship feeders to outside resources.

To complement the component tape feeders, Hover-Davis also offers their LPS (pre-printed label feeder) and POD600 (print-on-demand label feeder) - both of which are compatible with the Siplace placement machine family.

www.hoverdavis.com

Model M3 CableEye Cable and Wire Harness tester is now available with a USB interface, providing increased scanning speed and fast, problem-free setup. Loop test at more than nine 128-point scans per second for increased sensitivity to intermittent connections, over three times as fast as the serial port model. The USB interface ensures compatibility with all USB-equipped PCs, and offers optional automatic software start-up as soon as the tester's power is turned on.
 
Connect the M3 tester to a wireless USB adapter for greater freedom to place it in the most convenient location within the work area. Custom USB software driver is Microsoft-signed and tested, and the interface has been compliance-tested by an independent lab for USB logo qualification.
 
Offers resistance sensitivity from 0.3 ohms to 10 Megohms, expandability to 2072 test points and a benchmark acquisition time of two seconds for a 512 point system.
 
 
CAMI Research Inc., www.camiresearch.com