SelectiveRIDER soldering process measurement pallet delivers automated verification technologies for wave, reflow and selective soldering.

Enables validation of three phases of selective soldering: fluxing, pre-heating and soldering. Each element is measured using novel pallet design; data logging is achieved with SuperM.O.L.E. Gold 2 profiler; M.A.P. software facilitates data analysis and SPC.  Combines flux measurement via miniFluxometer V-gage test coupon, thermal parameter verification and wave metrics, including X/Y positioning, Z height, diameter measurements and dwell times. Features include flux location and accuracy verification; confirmation of dispense X/Y positional precision, with indication of any offset; identification of blocked or unprimed spray heads; verification of deposition (dot) size and capture of any under- or over-spray; indication of flux penetration success; excellent solder fountain measurement accuracy; X/Y sensor measures from target center and solder fountain diameter; fountain height confirmed to within 0.5mm with graduated sensors; dwell time accuracy to +/-0.01 sec. Measures max. pre-heat temp., solder temp. and Delta T during soldering.

SelectiveRIDER Operation Soldering Top focused

ECD
ecd.com

 

Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account