Delo-Duopox DB8989 light fixation two-component epoxy resin provides fast process speed.

In a couple of seconds, light fixation secures components. After an irradiation time of 5 sec. at an intensity of 1000 mW/cm², fixing strength of 1 N/mm² is achieved. Final curing, including shadowed areas, is done the same way as regular two-component products, either at room temp. or at faster speed by using heat curing at 80°C for 60 min. Has storage life of 12 months. Provides good strength even when exposed to high temp. and humidity. Achieves tensile shear strength of 28MPa on aluminum.  This value is maintained during aging simulations required in the automotive industry, for instance, after 500 hr. storage at 85°C and 85% relative air humidity or at 150°C. Can be used for structural bonding of rare earth magnets in electric motors. Is also suitable for opto-electronic applications in cameras for automated driving due to low outgassing and shrinkage.

Delo Industrial Adhesives
delo-adhesives.com/us/

 

Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article
Don't have an account yet? Register Now!

Sign in to your account