Fab Equipment Spending Remains Flat in 2013; Up 24% in 2014 PDF Print E-mail
Written by Christian Gregor Dieseldorff, SEMI   
Tuesday, 05 March 2013 17:43

SAN JOSE -- Fab equipment spending for Front End facilities is expected to hover around flat in 2013 and with an increase of 24% in 2014.

The SEMI World Fab Forecast, published at the end of February, reveals little has changed from the projections published at the end of November when the report was last issued. The report tracks equipment spending at over 180 facilities in 2013.

Fab Equipment Spending

At the time of the November 2012 publication, semiconductor companies had not announced their capex plans for 2013, so fab spending predictions were based on extensive modeling. More than 262 updates have been made since the last publication and are based on announced spending plans, including major changes for TSMC, Samsung, Intel, SK Hynix, Globalfoundries , UMC, and  for some Japanese facilities  and LED facilities.  Despite these adjustments, the overall forecast for equipment spending for 2013 has remained about the same. Depending on macro-economic risk factors, possible scenarios project a range of -3% to +3%  change rate for fab equipment spending in 2013; in other words, hovering around flat.

Global chip sales have started on a bright note in 2013, as the SIA reports that three-month average for global chip sales for January increased 3.8%  above January 2012. It also appears that the average sentiment for revenue growth is in the upper single digits in 2013, about 7% from a year ago compared to a loss of 3% in 2012.

Though the overall outlook has improved some, fewer players in the market can afford the rising costs for R&D and upgrading facilities as the amount of money needed to upgrade facilities at the leading edge technologies is immense. The World Fab Forecast report shows increases for fab equipment spending, varying by technology node.  Fab equipment spending for 17nm and below is expected to kick off in 2013 and increase by a factor of 2.4 to about $25 billion from 2013 to 2014.

Fab Equipment Spending

Fab construction spending is now expected to increase more than previously predicted. In November 2012, a change of 3.7% YoY was forecasted; now, 6.7% growth is forecasted with construction spending to reach almost $6 billion. In 2014, however, construction project spending is expected to contract by about 18%. Construction spending is led, far and away, by TSMC, with seven different projects for the year; followed by Intel with projects including D1X module 2, Fab 42 and some other sites. Fab construction spending in China will increase by a factor of four because of Samsung’s Mega fab in Xian.

Since the 2008/2009 economic downturn, the industry has been adding capacity more slowly than ever, as reflected in SEMI’s World Fab Forecast data. Capacity is now forecasted to expand by just 2.8% for this year, and to improve to 5.4% growth in 2014.

 

Worldwide Installed Capacity

 

Excluding 2009, the years 2012 and 2013 show the lowest growth rate for new capacity over that past ten years. The World Fab Forecast gives detailed capacity information by industry segment and by individual company and fab. Dedicated foundries are expected to add 10 to 11% more capacity in 2013 and 2014. Flash will add 4% new capacity in 2013 and about 10% in 2014.  New capacity expansions for the System LSI segment should drop from the double digits of previous years to single digits in 2013 and 2014.

We believe that there will be a pent-up demand for some product types because capacity additions have been cut to a minimum level while chip demand keeps increasing. Capacity additions and equipment spending are expected to pick up in the second half of 2013.  In 2014, at least 5% in new capacity will be added and fab equipment spending will increase by 24 percent. From now on until our next update the end of May 2013, our team around the world is expected to learn more details about planning at key companies in 2013 which will be reflected in our next edition. Stay tuned.

 

Last Updated on Wednesday, 06 March 2013 10:23
 

Columns

Eastern-US: China’s New Competitor?

Parity emerges among EMS Factories from Asia, Mexico and the US.

For the first time in years we see parity in the Eastern US among EMS factories from Asia, Mexico and the US. This EMS market condition will permit American OEMs (the EMS industry refers to OEMs as customers) to have more EMS pathways to choose from. Now more than ever, such EMS assignments will require deeper investigation relating to the OEMs’ evaluation of manufacturing strategies.

Read more...
 
The Human Touch

For those who count on the electronics industry for big feats, it’s been a remarkable couple of years.

Read more...
 

Features

Advances in Concentration Monitoring and Closed-Loop Control

Contaminated bath water skews refractive index results. New technology can accurately measure aqueous cleaning agent concentration.

Read more...
 
Circuits Disassembly: Materials Characterization and Failure Analysis

A systematic approach to nonconventional methods of encapsulant removal.

Read more...
 

Search

Search

Login

CB Login

Language

Language

English French German Italian Portuguese Russian Spanish
 

Products

Panasonic Debuts PanaCIM Maintenance with Augmented Reality
PanaCIM Maintenance with Augmented Reality software provides instant communication and information to factory technicians -- when and where it is needed -- so they can respond to factory needs more...