Semi Gear Spending to Taper through Year-End PDF Print E-mail
Written by Mike Buetow   
Friday, 29 June 2012 09:03

STAMFORD, CT — Worldwide wafer fab equipment spending is on pace to fall 8.9% to $33 billion in 2012 on lower demand for logic production gear.

 

A rebound is expected in 2013, says according to Gartner, with sales growing 7.4% to $35.4 billion.

"In 2012, WFE started off the year strong, as foundries and other logic manufacturers ramped up sub-30nm production," said Bob Johnson, research vice president at Gartner. "The need for new equipment was stronger than originally anticipated, because strengthening demand for leading-edge devices required higher production volumes as yields had yet to reach mature levels. However, demand for new logic production equipment will soften as yields improve, leading to declining shipment volume for the rest of the year."

Wafer fab manufacturing capacity utilization will decline into the mid-80% range by the middle of 2012 before slowly increasing to about 87% by the end of 2012. Leading-edge utilization will return to the high-80% range by the second half of 2012, and move into the low-90% range through 2013, providing for a positive capital investment environment.

"Production is getting back to more-normal levels, following a period of inventory correction," Mr. Johnson said. "Increased demand, combined with less-than-mature yields at the leading edge, is consuming increased capacity, with the result that utilization will begin to climb upward again in the second quarter of 2012. Capital spending restraints through the second half of 2012 will also slow new capacity additions, with the result that overall utilization rates will return to normal levels at the start of 2013. Leading-edge utilization will stay in the low-90% range through most of 2013, providing continued impetus for capital investment.

The industry was ramping up different technology nodes in 2011 and will continue to do so in 2012, driving a broad spectrum of equipment segment sales opportunities. The industry had been ramping up different technology nodes in 2011, and that continues in 2012. Foundry is ramping up 28nm, leading-edge logic has transitioned to 20nm, NAND flash will ramp up the 1X node, and DRAM will be ramping up 4X and 3X nodes. Gartner analysts said this will create different challenges for the equipment manufacturers because they face different issues at each node.

Semiconductor equipment demand is considered a leading indicator for future printed circuit board and electronics assembly orders.

Last Updated on Friday, 29 June 2012 09:11
 

Columns

Eastern-US: China’s New Competitor?

Parity emerges among EMS Factories from Asia, Mexico and the US.

For the first time in years we see parity in the Eastern US among EMS factories from Asia, Mexico and the US. This EMS market condition will permit American OEMs (the EMS industry refers to OEMs as customers) to have more EMS pathways to choose from. Now more than ever, such EMS assignments will require deeper investigation relating to the OEMs’ evaluation of manufacturing strategies.

Read more...
 
The Human Touch

For those who count on the electronics industry for big feats, it’s been a remarkable couple of years.

Read more...
 

Features

Advances in Concentration Monitoring and Closed-Loop Control

Contaminated bath water skews refractive index results. New technology can accurately measure aqueous cleaning agent concentration.

Read more...
 
Circuits Disassembly: Materials Characterization and Failure Analysis

A systematic approach to nonconventional methods of encapsulant removal.

Read more...
 

Search

Search

Login

CB Login

Language

Language

English French German Italian Portuguese Russian Spanish
 

Products

Panasonic Debuts PanaCIM Maintenance with Augmented Reality
PanaCIM Maintenance with Augmented Reality software provides instant communication and information to factory technicians -- when and where it is needed -- so they can respond to factory needs more...