The Worldwide Industrial Electronics Assembly Markets Defined Print E-mail
User Rating: / 0
PoorBest 
Written by Randall Sherman   
Monday, 30 April 2012 12:14

Test, clean energy and process control represent huge potential for EMS.

The industrial products industry for electronics assemblies is large and diverse. It is very attractive and profitable for many EMS suppliers because of the wide range of complex and high mix of electronics product assemblies. But it is also mysterious and vague, unless one understands the specific application for electronic content embedded within each product. OEMs and EMS seek participation of the other, because cost reductions of these assemblies are mandatory, so good partnerships are essential for staying competitive in this evolving industry.

We have segmented the industrial product market into four categories for easy understanding. These categories include process control, test & measurement, “other” industrial, and clean energy. Table 1 summarizes the total available market for electronic cost of goods sold (E-COGS) of industrial assembly products by market segment and geographic region for 2012.

While the market for industrial product assembly has been growing at approximately 5 to 7% annually, the EMS product assembly market has been growing at a much higher rate because of economies of scale inherent within the outsourcing value proposition. To date, EMS assembly accounts for approximately 23% of the total available market for industrial electronics in terms of revenue, but this percentage is increasing dramatically as the outsourcing is demonstrated. The largest industrial product market to date is Test & Measurement equipment sector, which is also the most electronic-intensive (Table 2).



Industrial process control is comprised of 13 leading product segments according to our field research and includes automation/programmable logic control, construction/agricultural/mining, electric motors, electrical distribution/smart grid, elevator systems, environmental management, fluid control/hydraulics, marine/waste water, oil/gas, power supplies, robotics, smart meters, and UPS/batteries. The leading application by far is automation/PLC, which is embedded in nearly every aspect of this market. The leading region for the assembly of these devices is the Americas followed by Asia Pacific (APAC), as most Asian OEMs prefer to manufacture in-house. The electronics content of process control equipment varies considerably by individual product, with automation/logic (primarily PLCs) and smart meters having the highest concentration.

Our research has identified approximately 52 leading industrial OEMs that are estimated to account for approximately 80% of all process control products. Leading suppliers include GE Industrial, Siemens, ABB, Hitachi, Yokogawa, Schlumberger, Mitsubishi, Emerson, Fujitsu, Bosch and many others. Most market leaders have internal low-cost manufacturing operations in all geographic regions, yet employ a variety of EMS subcontractors in areas where it makes economic sense in terms of supply and demand. The majority of subcontracting involves printed circuit boards (PCBs), and in some cases, the final integration or box assembly of the industrial product.

The test and measurement industry is challenging to segment given the wide range of high technology products, but we have profiled this by equipment size, applications and customer base. We have identified four distinct T&M equipment sectors, which include inspection equipment, metrology/instrumentation, semiconductor capital equipment, and general test and measurement hardware found in the home and industry. The leading region for manufacturing and consuming these devices, by a very wide margin, is the APAC region. While semiconductor manufacturing exists extensively in the Amercias and Europe/Middle East (EMEA), Asia has become the dominant region for most testing of semiconductor products because of the many end-products such as mobile phones and PCs.

Our survey profiled 24 leading industrial OEMs that currently manufacture test and measurement equipment. Major suppliers include Applied Materials, Tokyo Electron, Thermo Fisher, Agilent, Lam Research, Rohde & Schwartz, Parker Hannifin, ASML and Yokogawa, among others. Most large companies have transferred their manufacturing facilities to low-cost manufacturing operations in the APAC region, and their subcontractors have followed this trend in support. In most cases, the OEM is responsible for the final integration or box assembly of the industrial product, while the EMS manufactures the complex PCBs that account for the highest proportion of semiconductor electronics assembly. In certain cases, such as with small handheld test equipment, the EMS company will assemble and ship the entire product (PCB and box assembly).

“Other” industrial products comprise applications that do not fit neatly into a clear sector, sometimes defying classification altogether, including ATM/gaming equipment, HVAC, laundry/home appliances, lighting/LEDs, security/safety products, tools, and material handling/specialty equipment/other industrial hardware. Many of the sectors are quite large, such as LED lighting systems, while others are composed of multiple companies and derivative products, such as HVAC and home appliances, which nevertheless constitute significant markets, albeit minor ones for electronics assembly overall. (That is, the electronic content is less than 10% of the overall COGS.) As we have uncovered, the range of products is very extensive, but they are rich in electronics assembly potential.

Our survey identified 42 leading industrial OEMs that manufacture “other” industrial equipment. Setting aside for the moment the LED lighting industry (which includes OSRAM, Philips Lumileds, Nichia, Panasonic and Samsung), leading suppliers include Siemens, Cooper Industries, NCR, Electrolux, and United Technologies, among others. In many cases, the large OEMs maintain low-cost manufacturing facilities or employ subcontractors for PCB production. In some cases (such as with ATMs/gaming/vending machines), EMS companies play a vital role, given the complexity of semiconductor electronics on the PCB. For other products, such as tools and security products, the PCB assembly is not significant, given the overall assembly of the product.

While there is no standard definition of clean energy technology, we have defined it as a diverse range of products, interfaces and processes that harness renewable materials and energy sources, and thereby reduce the use of natural resources, and cut or eliminate emissions and wastes. We have focused on renewable technologies such as wind power, solar power, tidal, wind and fuel cells (and the necessary inverters), and the demand by consumers to manufacture these products cost-effectively.

Our survey of the clean industry sector includes market leaders such as LDK Solar, First Solar, SunTech Power, Q-Cells, SunPower, Trina Solar, Canadian Solar, and Solar World, among many others. The size of the solar energy sector far exceeds the current market size of the wind, tidal and fuel cell sectors. Inverters naturally apply to all of these product sectors and remain the primary product application for outsourcing.

The Worldwide Industrial Electronics Assembly Markets—2012 Edition is based on an in-depth examination of the top 100 industrial OEM companies and their outsourcing partners. Our forecasts conform to the research described in our sister publication, The Worldwide Electronics Manufacturing Services Markets – 2012 Edition.

Randall Sherman is president and principal analyst of New Venture Research (newventureresearch.com), a market research and consulting firm specializing in the electronics manufacturing industry; This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Last Updated on Monday, 30 April 2012 15:11
 

Columns

Eastern-US: China’s New Competitor?

Parity emerges among EMS Factories from Asia, Mexico and the US.

For the first time in years we see parity in the Eastern US among EMS factories from Asia, Mexico and the US. This EMS market condition will permit American OEMs (the EMS industry refers to OEMs as customers) to have more EMS pathways to choose from. Now more than ever, such EMS assignments will require deeper investigation relating to the OEMs’ evaluation of manufacturing strategies.

Read more...
 
The Human Touch

For those who count on the electronics industry for big feats, it’s been a remarkable couple of years.

Read more...
 

Features

Advances in Concentration Monitoring and Closed-Loop Control

Contaminated bath water skews refractive index results. New technology can accurately measure aqueous cleaning agent concentration.

Read more...
 
Circuits Disassembly: Materials Characterization and Failure Analysis

A systematic approach to nonconventional methods of encapsulant removal.

Read more...
 

Search

Search

Login

CB Login

Language

Language

English French German Italian Portuguese Russian Spanish
 

Products

Yincae Rolls Out ACP120 Solderable Coating
ACP 120 series anti-oxidation solderable coatings replace nanofilm gold. Are for anti-corrosion and anti-rusting on solderable surfaces on which solder paste, solder preform or a solder ball can be...